Dana Spicer Dana 44 Front Axle Assemblies

From $5,169.99

• The Dana Spicer Ultimate Dana 44 front axle assembly delivers the strength and durability on any trail you take
• SPL 1350 u-joints provides extra protection
• Spicer nickel chromoly steel axle shafts for optimal strength and performance
• Direct bolt-on for the Jeep front axle
• California Residents: WARNING

Dana Spicer Heavy Duty Axle U-Joints

From $15.99

• Heavy-duty forged cross
• Perma-lube improved seals for long service life
• OEM replacement
• Inside and outside snap rings
• Use Dana Spicer Jeep U joint for your next build
• California Residents: WARNING

Dana Spicer Axle Seals

From $20.99

• Single Seal One Side Only
• California Residents: WARNING

Dana Spicer Pinion Yokes

From $61.99

• Pinion Yokes
• Available for use with 1310, 1330 and 1350 U-Joints
• Strap and Bolt and U-Bolt style yokes
• Many applications available
• California Residents: WARNING

Dana Spicer Differential Pinion Oil Seals

From $14.99

• Pinion Oil Seal
• California Residents: WARNING

Dana Spicer Differential Covers

From $171.99

• Dana Spicer heavy-duty stamped steel Jeep differential covers are thicker than normal rear covers and are specifically designed for front axle applications where trail impacts are common place but will fit rear applications
• Includes new mounting hardware
• For use on Dana 60 axles and Dana 61 front and rear axles
• California Residents: WARNING

Dana Spicer Dana 60 Axle Shaft Assemblies

From $120.99

• Dana Spicer Dana 60 Axle Shaft Assemblies are ultrasonically tested for unparalleled reliability.
• Spicer parts are designed, engineered, and manufactured to meet or exceed OE requirements because they are OE parts, ensuring a perfect fit with our full line of industry-leading axles.
• Spicer Dana 60 Axle Shaft Assemblies are heat treated and cold formed rolled to ensure a much more consistent and stronger axle shaft.
• Spicer axle shafts undergo fatigue testing and ultrasonic testing, delivering a safety factor that’s high even by OE standards.
• California Residents: WARNING

Dana Spicer Spindle Bearing Seal Kits

From $16.99

• Spindle Bearing Seal Kits
• Dana 30 and dana 44
• Includes inner spindle bearing, v-lip seal, nylon thrust washer, and stub axle seal
• California Residents: WARNING

Dana Spicer Flange Yokes

From $65.99

• Dana Spicer Flange Yokes are forged from hardened steel and heat treated to endure tough conditions
• The Dana Spicer flange yokes adapts your standard style drive shaft to a flat companion flange style
• Dana Spicer flange yokes deliver the same quality and reliability you would expect from your original equipment part.
• California Residents: WARNING

Dana Spicer Outer Axle Dust Shields

From $3.99

• The Dana Spicer Outer Axle Dust Shield is for use with Dana Spicer front axles
• The Dana Spicer Outter Axle Dust Shield is used to help prevent dirt and debris from getting to the spindle seals and contaminating the grease which will cause damage to the bearings
• California Residents: WARNING

Dana Spicer Transfer Case/Pinion Nuts

From $3.99

• Crown Automotive Pinion Nut
• California Residents: WARNING

Dana Spicer U-Joint Strap Kits

From $8.99

• Dana Spicer bolt and strap kits are available for most common driveshaft u-joint sizes
• The Dana Spicer u-joint strap kits are made with stamped steel supplied with grade 8 retaining bolts
• Dana Spicer Strap Kits are engineered to deliver original equipment quality and performance
• California Residents: WARNING

Dana Spicer Inner Spindle Nuts

From $17.99

• Dana 60 Spindle Nut
• Inner Nut With Pin
• Services One Side Only
• California Residents: WARNING

Dana Spicer Dana 44 Open Differential Carrier Case

From $1,117.99

• With Non-Rubicon Dana 44 models
• For Use With 3.73 And Down Gears
• For Use In Rear Applications Only
• For Use With 30 Spline Axles
• California Residents: WARNING

Dana Spicer Ring and Pinion Kits

From $816.99

• Ring and Pinion Kits
• Same high-quality gears as factory
• Come in most popular performance and replacement ratios
• Special grade steel machined and heat-treated for a properly matched set for optimal set-up and gear mesh
• California Residents: WARNING

Energy Suspension Transmission Mounts

From $87.33

Dana Spicer Dana 60 Pinion Seal Slinger

From $2.99

• Dana Spicer Dana 60 Pinion Seal Slinger is for use in all standard pinion Dana 60 axles
• The Pinion Seal Slinger installs between the outter pinion bearing and pinion seal
• Dana Spicer Dana 60 Pinion Seal Slinger prevents oil spray and flooding of the pinion seal
• The Dana Spicer Dana 60 Pinion Seal Slinger is designed to limit the amount of oil that makes way to the pinion seal to help prevent pinion seal leaks
• California Residents: WARNING

Dana Spicer Dana 35 Open Differential Assembly

From $536.99

Dana Spicer Dana 30 4.56 Ratio Ring and Pinions

From $290.99

• All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
• Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears
• Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing
• California Residents: WARNING

Dana Spicer Dana 60 6.17 Ratio Ring and Pinions

From $965.99

• All Dana Spicer ring gear and pinion sets are designed and tested to meet original equipment specifications
• Spicer gearing is manufactured with a special grade of steel, machined and heat-treated to precision, so you can count on optimum set-up and mating of the gears
• Dana Spicer has conducted aggressive dynamometer tests to ensure exceptional performance of all of their genuine Spicer gearing
• California Residents: WARNING