Welcome Guest
SHOP JEEP PARTS
- Home
- Bumpers, Tire Carriers & Winch Mounts
- Front Bumpers
Smittybilt XRC GEN2 Bumper Packages
Smittybilt XRC GEN2 Front BumperFrom $1,399.98
- This Smittybilt Jeep front bumper package is covered in a two-stage textured matte black finish
- New Gen2 solid d-ring and jack point mount - welded on the inside and out
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- 1.75 inch 120 Wall over rider and kickers
- Lower design winch plate allows greater air flow and rated to accommodate up to 10k winch
- O.E. fog light provision
- Manufactured from 3/16 inch cold rolled steel
- Tow-able D-ring mounts
- Powder coat finish with 5-year limited warranty
- Smittybilt Advantage lifetime warranty
- Multiple option on this Wrangler front bumper package
- California Residents: WARNING
Genuine Packages Poison Spyder Bumper Packages
Genuine Packages Poison Spyder Bumper PackagesFrom $725.98
- Get maximum protection for your Jeep with our selection of Bumper Packages.
- California Residents: WARNING
Poison Spyder Brawler Lite Front Bumpers
Poison Spyder Customs Brawler Lite Front Bumpers
4.8
4.8
(4)
From $479.99
Ships Free
- The Poison Spyder RockBrawler front bumper for Jeep is fabricated from 3/16 inch steel plate, CNC laser cut and brake-formed for a precise fit.
- The Stinger is made of 1.75 inch X .120 wall DOM tubing.
- The two D-ring shackle mounts are CNC-machined from 1 inch plate steel.
- The integrated winch mount on this Wrangler front bumper accepts most major manufacturer's winches up to 15,000 lbs.
- Another characteristic of the RockBrawler is its amazing tire clearance.
- RockBrawler bumpers are shipped as BARE STEEL
- California Residents: WARNING
Smittybilt XRC Front Bumpers
Smittybilt XRC Front Bumper w/Winch Plate
4.5
4.5
(4)
From $199.99
Ships Free
- This Smittybilt XRC Jeep front bumper comes in a two stage textured matte black finish
- Innovative 3-piece design
- Lower design winch plate allowing greater air flow
- Manufactured from 3/16 inch cold rolled steel
- Bumper bolts directly to your vehicle
- Two 3/4 inch d-ring mounts
- 5 year limited warranty
- Rear bumpers available with and without tire carrier
- The must have Wrangler front bumper
- California Residents: WARNING
Smittybilt XRC Bumper Packages
Smittybilt XRC Bumper Package
5.0
5.0
(1)
From $604.98
- This Smittybilt XRC Jeep front bumper comes in a two stage textured matte black finish
- Innovative 3-piece design
- Lower design winch plate allowing greater air flow
- Manufactured from 3/16 inch cold rolled steel
- Bumper bolts directly to your vehicle
- Two 3/4 inch d-ring mounts
- 5 year limited warranty
- Rear bumpers available with and without tire carrier
- The must have Wrangler front bumper package
- California Residents: WARNING
Smittybilt SRC GEN2 Front Bumpers
Smittybilt SRC GEN2 Front Bumper
4.0
4.0
(1)
From $599.99
- Welcome to the Smittybilt SRC Gen2 Front Bumper for Jeep
- Solid d-ring and jack point mount - welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- Fender to fender protection
- 2 inch 120 Wall over rider and kickers
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- O.E. fog light provision
- Manufactured from 3/16 inch cold rolled steel
- Towable D-ring mounts
- Two-stage textured matte black powdercoat finish with 5-year limited warranty
- Smittybilt Advantage limited lifetime warranty: Great choice for a Wrangler front bumper
- California Residents: WARNING
Poison Spyder Brawler MID Front Bumpers
Poison Spyder Customs Brawler Mid Rear BumperFrom $539.99
Ships Free
- The Poison Spyder Wrangler front bumper ships in Bare steel
- These Jeep front bumpers are constructed of 3/16 inch plate steel
- Mid-width high clearance bumper
- Ends extend far enough to protect the lower corner of the JK grille
- Features recessed buckets to mount the factory fog lamp
- Available with and without D-ring mounts
- California Residents: WARNING
Smittybilt XRC M.O.D. Bumper Systems
Smittybilt XRC M.OD. Front Bumper
3.5
3.5
(6)
From $399.99
Ships Free
- The Smittybilt XRC M.O.D. Wrangler front bumper comes in a two stage textured matte black powder coat finish
- Built-in winch plate to accommodate up to a 15k winch
- Manufactured from 3/16 inch cold rolled steel
- Solid mount d-rings - Weld on the inside and out
- This Jeep front bumper also has multiple front bolt on option available
- California Residents: WARNING
Fab Fours Vengeance Front Bumpers
Fab Fours Vengeance Front BumpersFrom $1,399.99
- These fab Fours Jeep front bumpers are available in 2 Stage Black Powder Coat or Bare Steel
- Overall design and fit is High and Tight to the contours of the vehicle
- The Vengeance Series front bumper is sensor compatible
- Allows for an integrated 20 inch LED light bar in the center (light bar not included)
- Mounting options on each side for (2) 2x2 Dually lights to give you maximum LED light coverage
- Lower cutout to provide airflow to intercoolers
- Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
- Sensors optimized for vehicles with suspension lifts - stock height trucks may require tuning the sensor mount and will require special care
- Available in a no guard or pre-runner guard option as a Wrangler front bumper
- California Residents: WARNING
Smittybilt SRC Front Bumpers
Smittybilt SRC Front Bumper
4.8
4.8
(22)
From $269.99
Ships Free
- This Smittybilt Jeep front bumper is a durable 2 inch x .120 inch wall tube. Coated in a textured black powder coat
- A pre runner style bumper that includes mounts for offroad lights
- This Wrangler front bumper mounts directly to your vehicle.
- California Residents: WARNING
Poison Spyder BFH Front Bumpers
Poison Spyder Customs BFH Front Bumper
4.7
4.7
(6)
From $319.99
Ships Free
- This Poison Spyder Wrangler front bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible.
- It is no wider than the Jeep's frame rails
- CNC laser-cut from a single piece of high strength 3/16 inch plate steel
- These BFH Jeep front bumpers feature an integrated winch mount and one-piece design.
- At a mere 35 pounds, the BFH is among the lightest bumpers on the market.
- Even fully outfitted with Brawler Bar and Heavy Duty Shackle Tabs, the BFH weighs only 43 pounds!
- California Residents: WARNING
ARB Deluxe Winch Front Bumpers
ARB 4x4 Accessories Deluxe Winch Front Bumpers
4.0
4.0
(1)
From $807.50
- ARB Jeep front bumpers offer maximum protection with durable steel construction
- ARB's winch front bumper for Jeep is loaded with features aimed at making remote area travel safe
- No other bumper offers the same degree of vehicle integration and functionality.
- Wrangler front bumper includes: tow points, antenna mounts,light mounts
- California Residents: WARNING
Poison Spyder Brawler Full Width Front Bumpers
Poison Spyder Customs Brawler Full Width Front BumpersFrom $669.99
Ships Free
- This Poison Spyder Brawler Wrangler front bumper constructed in the FULL Width size is fabricated from 3/16" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
- These Jeep front bumpers ship as bare steel—it will need to be painted or powder coated prior to final installation.
- Works with stock JK fender flares.
- Includes recessed fog light buckets and high clearance recovery shackle tabs
- California Residents: WARNING
Fab Fours Front Grumper Bumpers
Fab Fours Grumper Winch BumperFrom $329.99
- This Fab Fours Jeep front bumper has removable inserts for customization options
- Provides greater tire clearance
- Winch Ready-Accepts Warn Zeon Winches
- Integrated D-Ring mounts that hold up to 7/8 shackle
- 11-gauge steel construction
- This Wrangler front bumper is 100% Made in the USA
- California Residents: WARNING
Smittybilt XRC Atlas Front Bumpers
Smittybilt XRC Atlas Front Bumper
4.1
4.1
(7)
From $699.99
- This Smittybilt XRC Atlas Jeep front bumper comes in a two stage textured matte black finish
- Innovative 3-piece design
- Lower design winch plate allowing greater air flow
- Manufactured from 3/16 inch cold rolled steel
- Bumper bolts directly to your vehicle
- Two 3/4 inch d-ring mounts
- 5 year limited warranty
- The must have Wrangler front bumper
- California Residents: WARNING
Smittybilt XRC GEN1 Front Bumper
Smittybilt XRC GEN1 Front Bumper
4.0
4.0
(1)
From $299.99
Ships Free
- Two stage matte black powder coat finish
- Manufactured from 3/16" cold roll steel
- 1.75" 120 wall over rider and kickers
- Raised corners for better entry and exit under the most extreme conditions
- Solid mount D-Rings - Welds on the inside and out
- Solid plate center section that wraps the frame horns and lower cross member
- Built-in winch plate to accommodate up to 10k winch
- One-piece welded design
- 5-year limited warranty
- California Residents: WARNING
Rampage Recovery Front Bumpers
Rampage Recovery Front Bumper with Stinger
4.4
4.4
(8)
From $425.99
Ships Free
- Rampage Recovery Jeep front bumpers come in Black powder coat
- Custom welded Shackle mounts with 3/4 shackle d-rings on this Wrangler front bumper help in recovery
- 3/16 inch steel plate design
- Two 4 inch light openings (Lights sold separately)
- California Residents: WARNING
Smittybilt XRC Rock Crawler Winch Bumpers
Smittybilt XRC Front Bumper
4.7
4.7
(12)
From $429.99
Ships Free
- Smittybilt XRC Rock Crawler Jeep front bumper comes in a two stage textured matte black finish
- Lower design winch plate allowing greater air flow
- Manufactured from 3/16 inch cold rolled steel
- Stinger is 1.75 inch tubing
- Bumper bolts directly to your vehicle
- Two 3/4 inch d-ring mounts
- 5 year limited warranty
- Accepts up to two 9 inch lights
- The must have Wrangler front bumper
- California Residents: WARNING
Body Armor 4X4 Front Bumpers
Body Armor 4x4 Front Bumper
4.3
4.3
(3)
From $399.99
Ships Free
- Body Armor 4x4 Jeep front bumpers are covered in a textured Black powder coat finish
- All Wrangler front bumpers are constructed of 3/16 inch steel plate
- Integrated winch mount and 4.5 inch light pockets
- California Residents: WARNING
Smittybilt Front Tube Bumpers
Smittybilt Front Bumper
4.3
4.3
(4)
From $139.99
Ships Free
- Smittybilt tube Wrangler front bumpers are available in Black Powder Coat and Stainless Steel
- One-piece design
- Robotically welded for extreme durability
- Pre-cut vertical uprights for a signature look
- 5-year limited warranty
- Great option for a Jeep front bumper
- California Residents: WARNING
Warn Elite Series Front Bumpers
Warn Elite Series Front Bumpers
4.2
4.2
(6)
From $617.99
Ships Free
- Warn Elite Series Jeep front bumpers are covered in a Black powder coat wrinkle finish
- Ends are tapered for increased approach angles
- Welded eyelets to mount D-shackles
- Minimal drilling and cutting required to install this Wrangler front bumper
- California Residents: WARNING
Smittybilt SRC Classic Rock Crawler Front Bumpers
Smittybilt SRC Classic Rock Crawler Front Bumper
4.0
4.0
(8)
From $154.99
Ships Free
- The Smittybilt Wrangler front bumper is covered in a Two-stage textured matte black powdercoat finish
- This Jeep front bumper is a 1/4 inch steel plate design
- Bumpers bolt directly to your vehicle
- Requires no drilling or modifications
- 5-year limited warranty
- California Residents: WARNING
Smittybilt SRC Front Stinger Bumpers
Smittybilt SRC Stinger
4.8
4.8
(4)
From $439.99
Ships Free
- The Smittybilt SRC Stinger Jeep front bumper is manufactured from 2 inch DOM 120 steel tubing and 3/16 inch cold rolled steel
- The D-ring mounts are welded inside and out
- Finally this Wrangler front bumper is covered in a textured black powder coat
- Winch can be attached using various manufacturer winch plates
- California Residents: WARNING
Pro Comp Crawler Bumpers
Pro Comp Suspension Procomp Jeep Crawler Front Bumper
3.3
3.3
(4)
From $90.99
Ships Free
- Gloss Black powder coat finish
- Constructed with 1/4 inch plate steel
- Designed for high departure and approach angles
- California Residents: WARNING
Your weekends are your own, meant for WOT adventure, mud drama and rock crawling. Juiceboxes are for weekdays. You would rather sidehill than channel surf, and sea shores are meant for meat racing, not paddleboarding. When your adventures dent your bumper, check here at 4WD first for the lowest replacement prices around.
Bumpers Dent, They Don't Die
You prefer to wrench on your Jeep instead of leaving it stock. Adding light bars, meats and off pavement nav systems makes your Jeep truly unique. Before you head out to enjoy more panoramic views with your mud covered stone breakers, think about adding DVB bumpers, a Smittybilt winch system or a Jeep front bar. Rock massaging occurs, but sliding into a boulder and taking out your grill doesn't have to be the end of your adrenalin packed day when you have a front bumper. You might have a king-sized dent, but not enough to curtail your plans to flip to low range and climb the next rocky slope.
Bumpers Push Back
Doors off, top down and covered in mud, your Jeep gets you into the middle of nature, not just close to it. If it rains, you laugh it off and hunker down until it passes, and then celebrate the mud the rain left behind. Living exhilarates you and your buddies as you coax your suspension over the next obstacle. When that obstacle pushes back, be prepared with Jeep Wrangler bumpers for sale here at 4WD.com.
Bumpers Keep You on the Road
Whether you're a spotter or driver, bumpers help you keep up with your active lifestyle by keeping your Jeep on the road instead of in the garage. Place your order today and do so with confidence that you are getting the lowest price available. If you find a lower price on the same unit within ninety-days of purchase, we will price match. We have a massive selection of parts, so find a bumper that's right for you and order today.
Popular searches: jeep wheels and tires, jeep wrangler seat covers, jeep wrangler performance parts, jeep wrangler seats
795 Results Found
SORT BY
On Sale
Smittybilt XRC Gen2 Front Bumper with Winch Plate (Black) - 76807
Smittybilt XRC Gen2 Front Bumper with Winch Plate (Black) - 76807
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- 3/16-inch cold rolled steel
- Two-stage textured matte black finish
- 1.75" .120 wall kickers offers fender-to-fender coverage
- PP+TPO slip strips – the ultimate for rock crawling, provides 5/16" additional damage protection
- Max solid D-ring and jack point mount welded on the inside and out
- OE fog light ports (Lights not included)
- Smittybilt Advantage Lifetime Warranty
- California Residents: WARNING
$499.99
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar (Black) - 17-59-010DBP1
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar (Black) - 17-59-010DBP1
4.0
4.0
(1)
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Black powder coat
- 3/16" plate steel
- Mid-width high clearance bumper
- Ends extend far enough to protect the lower corner of the JK grille
- Features recessed buckets to mount the factory fog lamps
- Integrated winch mount
- Brawler bar is 1-3/4" diameter .120" wall DOM tubing
- Shackle tabs made of 1" thick plate steel
- California Residents: WARNING
$769.99
On Sale
Smittybilt SRC Gen2 Front Bumper (Black) - 76724
Smittybilt SRC Gen2 Front Bumper (Black) - 76724
4.0
4.0
(1)
- 07-Current Wrangler JK, 2 & 4 Door
- New max solid d-ring and jack point mount - welded on the inside and out
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- Fender to fender protection
- 2" 120 Wall over rider and kickers
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- O.E. fog light provision
- Manufactured from 3/16" cold rolled steel
- Towable D-ring mounts
- Two-stage textured matte black powdercoat finish with 5-year limited warranty
- Smittybilt Advantage limited lifetime warranty
- California Residents: WARNING
$499.99
Poison Spyder Brawler Lite Front Midwidth Bumper with Brawler Bar and Tube Gussets (Black) - 17-63-010DBTP1
Poison Spyder Brawler Lite Front Midwidth Bumper with Brawler Bar and Tube Gussets (Black) - 17-63-010DBTP1
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Black powder coat
- 3/16" plate steel
- Mid-width high clearance bumper
- Skid plate shown is sold separately
- Ends extend far enough to protect the lower corner of the JK grille
- Features recessed buckets to mount the factory fog lamps
- Integrated winch mount
- With shackle tabs
- California Residents: WARNING
$799.99
Tax Paid
Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes (Black) - 76892
Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes (Black) - 76892
4.1
4.1
(7)
- 07-Current Wrangler JK, 2 & 4 Door
- Innovative 3-Piece Design
- Lower Design Winch Plate Allowing Greater Air Flow
- Two Stage Textured Matte Black Finish
- Manufactured From 3/16 “ Cold Rolled Steel
- Bumper Bolts Directly To Your Vehicle
- Two 3/4 Inch D-Ring Mounts
- 5 Year Limited Warranty
- If Using Smittybilt Tow Bar#87450 You Will Need To Use Tow Bar Adapter S/B#87451
- California Residents: WARNING
$699.99
Tax Paid
Smittybilt SRC Carbine Front Bumper (Black) - 76744
Smittybilt SRC Carbine Front Bumper (Black) - 76744
5.0
5.0
(3)
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Factory 10th Anniversary Rubicon lights will not fit
- 3/16" cold rolled steel
- Signature two-stage, textured black finish
- Open top and side design fits virtually all winch sizes
- 1.75" .120 wall overrider and kickers
- Removable bull bar
- Unique triangulation anchor fastens to frame in multiple locations
- Raised corners for better entry and exit under the most extreme conditions
- Integrated winch plate fits up to 12,000 lb winch
- Integrated Gen2 light tabs
- Dual winch bolt pattern: 4.5" x 10" and 4.5" x 6"
- Solid ¾" D-ring mounts - welded on the inside and out
- Ability to retain factory fog lights (lights not included)
- WILL ONLY FIT WITH FACTORY HALOGEN LIGHTS NOT THE FACTORY LED LIGHTS
- California Residents: WARNING
$369.99
Genuine Packages Smittybilt XRC Gen2 Front Bumper and Winch Package (Black) - JKSPECIAL05
Genuine Packages Smittybilt XRC Gen2 Front Bumper and Winch Package (Black) - JKSPECIAL05- 07-Current Wrangler JK, 2 & 4 Door
- Two-stage textured matte black finish
- New Gen2 solid d-ring and jack point mounts
- Welded on the inside and out
- XRC 9.5 GEN2 Winch
- Rated line pull: 9,500 lbs. single-line
- Gear ratio: 161.28:1
- Waterproofing: IP67 rating
- Fairlead: 4-way roller
- Cable: 93.5� wire cable 5/16" diameter
- California Residents: WARNING
$999.98
Tax Paid
Smittybilt SRC Front Grille Guard Bumper with D-ring Mounts (Black) - 76721
Smittybilt SRC Front Grille Guard Bumper with D-ring Mounts (Black) - 76721
4.8
4.8
(16)
Ships Free
- 87-06 Wrangler TJ/YJ
- Textured black powder coat
- 63" x 15" x 13"
- Four tabs to mount lights
- Wide opening allows for winch installation
- 1/4" thick custom mounting brackets
- Welded d-ring tabs
- Durable 2"x.120" wall over built
- Bumpers bolt directly to your vehicle
- Requires no drilling or modifications
- 5-year limited warranty
- California Residents: WARNING
$269.99
Tax Paid
Smittybilt XRC Gen2 Front Bumper Package (Black) - XRCJK5.1
Smittybilt XRC Gen2 Front and Rear Bumper Package (Black) - XRCJK5.1- 07-Current Wrangler JK, 2 & 4 Door
- Front and rear bumper with tire carrier bumper
- Manufactured from 3/16" solid plate
- 5-year limited warranty
- California Residents: WARNING
$1,899.97
Tax Paid
Smittybilt XRC Gen2 Front and Rear Bumper Package (Black) - XRCJK6.1
Smittybilt XRC Gen2 Front and Rear Bumper Package (Black) - XRCJK6.1- 07-Current Wrangler JK, 2 & 4 Door
- Front and rear bumper
- Manufactured from 3/16" solid plate
- 5-year limited warranty
- California Residents: WARNING
$1,399.98
Poison Spyder Customs Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs (Black) - 17-64-020DBTP1
Poison Spyder Customs Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs (Black) - 17-64-020DBTP1
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Provides the highest ground and tire clearance possible in a full width JK bumper
- Extends to the full width of the stock flares, to integrate with them cleanly while protecting them from trail hazards
- Includes DOM tubular Brawler Bar, recessed fog light buckets and high clearance recovery shackle tabs
- Black SpyderShell Armor Coat finish carries a 5-year Limited Warranty
- California Residents: WARNING
$1,499.99
Tax Paid
Smittybilt SRC Gen2 Front Bumper Package (Black) - BMPRPKG2.1
Smittybilt SRC Gen2 Front Bumper Package (Black) - BMPRPKG2.1- 07-Current Wrangler JK, 2 & 4 Door
- Textured black powder coat
- OE fog light provision
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- 2"x.120" wall 2" Class III Receiver
- New max solid d-ring and jack point mount - welded on the inside and out
- Bumpers bolt directly to your vehicle
- 5-year limited warranty
- California Residents: WARNING
$1,199.98
Tax Paid
Smittybilt XRC Gen 1 Front Bumper (Black) - 76806
Smittybilt XRC Gen 1 Front Bumper (Black) - 76806
4.0
4.0
(1)
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Two stage matte black powder coat finish
- Manufactured from 3/16" cold roll steel
- 1.75" 120 wall over rider and kickers
- Raised corners for better entry and exit under the most extreme conditions
- Solid mount D-Rings - Welds on the inside and out
- Solid plate center section that wraps the frame horns and lower cross member
- Built-in winch plate to accommodate up to 10k winch
- One-piece welded design
- 5-year limited warranty
- California Residents: WARNING
$299.99
Tax Paid
Smittybilt SRC Front Stinger with D-ring Mounts (Black) - 76521
Smittybilt SRC Front Stinger with D-ring Mounts (Black) - 76521
Ships Free
- 87-06 Wrangler TJ/YJ
- Textured black
- Manufactured from 2" DOM 120 steel tubing and 3/16" cold rolled steel
- D-ring mounts welded inside and out
- Can be used with various winch plates
- Maximum clearance for approach and departure angles
- California Residents: WARNING
$279.99
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar (Bare)- 17-59-010-DB
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs and Brawler Bar (Bare)- 17-59-010-DB
5.0
5.0
(1)
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- 3/16" plate bare steel
- Mid-width high clearance bumper
- Ends extend far enough to protect the lower corner of the JK grille
- Features recessed buckets to mount the factory fog lamps
- Integrated winch mount
- Brawler bar is 1-3/4" diameter .120" wall DOM tubing
- Shackle tabs made of 1" thick plate steel
- California Residents: WARNING
$649.99
Tax Paid
Smittybilt XRC Rock Crawler Winch Front Bumper with D-ring Mounts (Black) - 76810
Smittybilt XRC Rock Crawler Winch Front Bumper with D-ring Mounts (Black) - 76810
4.5
4.5
(4)
Ships Free
- 84-01 Cherokee XJ
- Textured black
- 3/16 cold rolled steel
- One-piece welded design
- Raised corners for better entry and exit
- Built-in winch plate to accommodate up to a 12k winch
- Optional Bull Bar sold separately as part number 76811
- 5-year limited warranty
- California Residents: WARNING
$459.99
Tax Paid
Smittybilt XRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts (Black) - 76825
Smittybilt XRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts (Black) - 76825
3.2
3.2
(5)
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Two Stage Textured Matte Black Powder Coat Finish
- Built-In Winch Plate To Accomodate Up To A 15k Winch
- Manufactured From 3/16" Cold Rolled Steel
- Solid Mount D-Rings - Welded On The Inside And Out
- California Residents: WARNING
$399.99
Poison Spyder Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs (Bare) - 17-64-020-DBT
Poison Spyder Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs (Bare) - 17-64-020-DBT
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Bare Steel
- Full-width, multi-faceted design protects lower grille and extends to outer edge of stock flares
- CNC laser cut from 3/16" plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)
- "Brawler Bar" made of 1.5" X .120" wall DOM tubing with 1.25" OD X .120" wall DOM tube gussets
- High clearance recovery shackle tabs CNC machined from 1" thick plate steel
- California Residents: WARNING
$769.99
Tax Paid
Smittybilt XRC Rock Crawler Winch Front Bumper with Grill Guard and D-ring Mounts (Black) - 76800
Smittybilt XRC Rock Crawler Winch Front Bumper with Grill Guard and D-ring Mounts (Black) - 76800
4.7
4.7
(7)
Ships Free
- 97-06 Wrangler TJ/LJ
- 2-stage textured black powder coat
- Degree approach angles and raised corners
- 3/16" cold rolled steel
- Stinger is 1.75" tubing
- Accepts up to two 9" lights
- Bumpers bolt directly to your vehicle
- 5-year limited warranty
- California Residents: WARNING
$429.99
Genuine Packages Smittybilt SRC Front Bumper and Winch Package (Stainless Steel) - TJSPECIAL05
Genuine Packages Smittybilt SRC Front Bumper and Winch Package (Stainless Steel) - TJSPECIAL05- 97-06 Wrangler TJ/LJ
- 2 tabs for light mounting
- Wide opening allows for winch installation
- 1/4" thick custom mounting brackets
- Welded d-ring tabs
- XRC 9.5 GEN2 Winch
- Rated line pull: 9,500 lbs. single-line
- Gear ratio: 161.28:1
- Waterproofing: IP67 rating
- Fairlead: 4-way roller
- Cable: 93.5� wire cable 5/16" diameter
- California Residents: WARNING
$569.98
Poison Spyder BFH II Front Bumper with Brawler Bar (Black) - 17-16-021-DBP1
Poison Spyder BFH II Front Bumper with Brawler Bar (Black) - 17-16-021-DBP1
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Lightweight, high clearance "stubby" bumper design
- "Brawler Bar" made of 1.5" X .120" wall DOM tubing with 3/16" plate steel gussets
- SpyderShell Armor Coat semi-gloss black finish
- Recessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)
- High clearance recovery shackle tabs CNC machined from 1" thick plate steel
- Requires cutting the frame
- California Residents: WARNING
$549.99
Poison Spyder BFH II Front Bumper with Trail Stinger (Black) - 17-16-021-DSP1
Poison Spyder BFH II Front Bumper with Trail Stinger (Black) - 17-16-021-DSP1
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Lightweight, high clearance "stubby" bumper design
- "Trail Stinger" made of 1.5" X .120" wall DOM tubing with 3/16" plate steel gussets
- SpyderShell Armor Coat semi-gloss black finish
- Recessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)
- High clearance recovery shackle tabs CNC machined from 1" thick plate steel
- California Residents: WARNING
$549.99
Poison Spyder Customs Bruiser MID Front Bumper (Black) - 17-55-010DBTP1
Poison Spyder Customs Bruiser MID Front Bumper (Black) - 17-55-010DBTP1
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Mid-width, multi-faceted design protects lower grille and extends halfway across the front of the tires
- Recessed winch mount
- Brawler Bar made of DOM tubing with tube gussets
- SpyderShell� Armor Coat semi-gloss black finish
- Recessed light mounts accept LED cube lights
- California Residents: WARNING
$819.99
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs, Trail Stinger and Tube Gussets (Bare)- 17-59-010-DST
Poison Spyder Brawler Lite Front Bumper with Shackle Tabs, Trail Stinger and Tube Gussets (Bare)- 17-59-010-DST
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Bare steel
- 3/16" plate steel
- Mid-width high clearance bumper
- Ends extend far enough to protect the lower corner of the JK grille
- Features recessed buckets to mount the factory fog lamps
- Integrated winch mount
- Shackle tabs are 1" thick steel billet
- Trail Stinger is made of CNC laser-notched, NC-bent 1-3/4" diameter .120" wall DOM tubing
- Fortified by a pair of 1-1/4" diameter .120" wall DOM tube gussets
- California Residents: WARNING
$649.99
When you need Jeep bumpers or accessories, 4WD should be your first and only stop. Find the most innovative off-road bumper designs, including front bumpers for Jeep that are designed to perform under extreme conditions. Some bumper models feature integrated winch mounts, tow hooks or modular designs to allow you to use your Jeep for a wide variety of purposes. Whether you have gotten a dent in your bumper or are looking for better Jeep Wrangler front bumpers for sale, we make it easy to find and order a front bumper for your rig.
Width and Strength
A major consideration is the size of the new bumper you plan to install. We stock Smittybilt Front Bumpers in a range of sizes and designs ranging from light to mid-width and full width. Choose from finishes including black powdercoat or models that feature a zinc undercoat. You can find a bumper designed with durable d-ring and jack point mounts that are welded on both sides. Make sure that the bumper style you choose will enable you to use all of the lights you depend on, including your fog lights. Serious off-roaders should look out for heavy duty bumpers made out of cold rolled steel or steel plate that provide sufficient ground clearance.
Save Money and Your Rig
Make sure the body of your rig and the components under the hood are better protected with our selection of front bumpers, Jeep rear bumpers, and Jeep bumper parts. Certain bumpers make it easier for you to make the most of the towing capabilities of your Jeep or add a winch for even more versatility when it comes to pulling other vehicles or performing tasks. Go ahead and order a new bumper, knowing that you can rely on 4WD to have your parts, ship them in a timely manner, and match the lowest available price.
Popular searches: jeep roof rack, jeep wrangler soft top, jeep wrangler center console, jeep spare tire carrier
Related Articles:
Jeep Wrangler Bumpers? All-Around Alliance
Bestop HighRock 4x4 Bumper System: Reliable Protection
Warn Bumpers for Jeeps
Smittybilt Bumpers
Benefits of Smittybilt Jeep Front and Rear Bumpers
Body Kit Upgrades for Your Jeep Wrangler
Width and Strength
A major consideration is the size of the new bumper you plan to install. We stock Smittybilt Front Bumpers in a range of sizes and designs ranging from light to mid-width and full width. Choose from finishes including black powdercoat or models that feature a zinc undercoat. You can find a bumper designed with durable d-ring and jack point mounts that are welded on both sides. Make sure that the bumper style you choose will enable you to use all of the lights you depend on, including your fog lights. Serious off-roaders should look out for heavy duty bumpers made out of cold rolled steel or steel plate that provide sufficient ground clearance.
Save Money and Your Rig
Make sure the body of your rig and the components under the hood are better protected with our selection of front bumpers, Jeep rear bumpers, and Jeep bumper parts. Certain bumpers make it easier for you to make the most of the towing capabilities of your Jeep or add a winch for even more versatility when it comes to pulling other vehicles or performing tasks. Go ahead and order a new bumper, knowing that you can rely on 4WD to have your parts, ship them in a timely manner, and match the lowest available price.
Popular searches: jeep roof rack, jeep wrangler soft top, jeep wrangler center console, jeep spare tire carrier
Related Articles:
Jeep Wrangler Bumpers? All-Around Alliance
Bestop HighRock 4x4 Bumper System: Reliable Protection
Warn Bumpers for Jeeps
Smittybilt Bumpers
Benefits of Smittybilt Jeep Front and Rear Bumpers
Body Kit Upgrades for Your Jeep Wrangler