Dana Spicer Line Of Upgraded Heavy Duty U-Joints Feature A Superior Forged Body With Improved Seals To Prevent Water From Entering The U-Joint. These U-Joints Do Not Have A Lube Channel To Help Prevent Breakage From Today's High Performance Engines And Big Tires.
Replaced the front axle u-joints in my Jeep Wrangler with these because Spicer is the best and I want to be able to depend on my Jeep whether on the trails or daily driving.
These were replacing stock axle joints so the performance difference was immediate!!
This was a dream after using joints from a local shop. Even though they said it was the correct part, I had to grind down the spiders to fit. No wonder those joints failed. I checked the meaurements given, and yep, Dana Spicer is the way to go. One tip, be very careful putting the caps on. The needle bearings may get dislodged and prevent the cap from seating completely. I actually destroyed one cap trying to force it. A new joint after discovering my error, and all was fine.
Make sure you have the right tools before you start this install or it could be rather time consuming! A bench vise, press, and heavy hammer are highly recommended. Use safety glasses!!!
Hi ! Will this work with my 2009 JKU Rubicon ?
Asked by CHRIS from France on
Hello Chris, For a JK Rubicon check out part #D/S5-7166X. This part number will not work for you. Here is the link. http://www.4wd.com/Jeep-Drivetrain-Jeep-Axles-Differentials/JK-Wrangler-Rubicon-Axle-U-Joint.aspx?t_c=12&t_s=237&t_pt=101013&t_pn=D%2fS5-7166X
Answered by Matt C EXT 4831 from France on
Will this fit my 2010 jeep wrangler sport? 2010 Jeep wrangler Sport moderate offroading (green trails)
Asked by bedford from Malvern,PA on
Hello, Yes this Dana Spicer U Joint will work on your 2016 Jeep Wrangler Sport. If you have anymore questions feel free to ask, Thank you.
Answered by [email protected] from Malvern,PA on
The description says that these are for Cherokee's with ABS. I have a 94 XJ Sport without ABS. Will these work? What Dana/Spicer brands will?
Asked by Sb from Venice, Ca on
Hi Sb They are showing the Dana 30/35/44 Heavy Duty Axle U-Joint for 1988-2001 with the 1.187 diameter cap. The 1984-1993 would have used D/S5-260X. It would be best to measure what is in it before ordering as it could be either on the 1994. Thanks
Answered by LWiff ext 4804 from Venice, Ca on
Dana Spicer products strive to meet the same high standards as OE parts, but in reality they are OE parts. The company's commitment to engineering and design innovation stretches back to 1904 when Dana was founded and began producing Spicer products. That legacy translates to quality, dependable axle components that keep Jeeps out on the trail and help daily drivers brave commutes with confidence. Driveshaft parts, universal joints, Dana axles and Spicer axle components are some of the Dana Spicer products that Jeep owners know they can count on. When you need to tighten up a sloppy differential, replace the clutches in your limited slip or replace a worn out yoke, call on Dana Spicer. Shop Dana Spicer Now