Jeep Wrangler (JK) 2016 Heim Joint

Rubicon Express Super-Flex Joint Races

From $11.99

• This kit features an extra thick threaded insert for adjustment and rebuilding. UHMW-PE races for superior impact resistance and anti-friction properties with a precision machined end right that eliminates the use of the snap-ring and washer found in the RE3791 and RE3792 Super Flex assemblies. Features 32 degrees of mis-alignment.
• California Residents: WARNING

Rubicon Express Super-Flex Joint Assemblies

From $35.99

• Universal builder part
• Designed to fit in front or rear upper control arm mounts
• California Residents: WARNING

Rubicon Express Super-Flex Coupler Assemblies

From $51.99

• These assemblies are welded, powder coat Rubicon Grey and fully assembled ready for immediate use! Features a small Super Flex housing and 1 inch threaded coupler used in Rubicon track bars and upper control arms.
• California Residents: WARNING

Currie Johnny Joint Rod Ends

From $57.00

• Currie Enterprises Johnny Joints
• Thin Body Available
• Rebuildable
• Multipal Sizes
• California Residents: WARNING

Artec Industries Heim Joint Kits and Accessories

From $11.99

• Made of 303 stainless steel
• California Residents: WARNING

Rock Krawler Joints

From $28.99

• Precision engineered for your vehicle
• Tested to outperform all comparable products on the market
• Made from premium materials to endure years of abuse
• Improves your vehicle's handling
• Designed for perfect fit and function
• Features a chromoly forged housing with a hardended chrome plated ball made from 52100 series steel
• Self lubricating for ease of maintenence with a teflon or nylafiber race way
• California Residents: WARNING

Rubicon Express Super-Flex Housing and Couplers

From $13.99

• Universal builder part
• Housing and coupler only
• Internals must be purchased separately
• California Residents: WARNING

Rubicon Express High-Misalignment Spacer

From $3.99

• The Rubicon Express High-Misalignment Spacers are CNC machined and Zinc plated for corrosion resistance
• These Hi-Misalignment spacers will allow for greater operating angle from your heim joints
• Wide misalignment spacers offer more misalignment than the narrow spacers
• California Residents: WARNING

Trail Gear Rod End Kit

From $102.99

• The main body of this rod end is 100% 4340 chromoly and then finished with a zinc coating, the ball is made out of AISI 52100 material and then hard chrome-plated for a tough finish. The liner is made out of a teflon. Comes with the jam nut.
• California Residents: WARNING

Rubicon Express Super Flex Rod End Balls

From $13.99

• Maintain or replace broken control arm components with genuine Rubicon Express Replacement Parts.
• California Residents: WARNING

Skyjacker New Generation Rebuildable Rod End Kit

From $75.89

• Rebuildable Rod End Kit
• 1.25 in. Rod Ends
• Incl. Rebuildable Rod End/Pivot Plus Inserts/Jam Nut
• For 14 mm Bolts
• California Residents: WARNING

Trail Gear Misalignment Spacers

From $22.99

• High misalignment spacers increase misalignment by continuing the spherical diameter of the ball and allowing the edge of the ball to rotate into the body of the rod end. This allows greater articulation, more suspension travel, and longer life of the rod end.
• California Residents: WARNING

Rubicon Express Heim Joint

From $7.79

• Features a precision ground, heat treated and hard chrome plated ball surrounded by a teflon/kevlar self lubricating race all encased in a low carbon steel body that is zinc plated for corrosion resistance. Jam nut not included.
• California Residents: WARNING

Rubicon Express Super-Flex Joints

From $11.99

• Rebuild your Rubicon Express Super-Flex Joints with these replacement races and keep the rod end operating and articulating smoothly and quietly.
• California Residents: WARNING

Fabtech Heim Joint

From $30.99

• HD Heim Joint
• Teflon Lined
• Sold Individually
• California Residents: WARNING

Rubicon Express Hi-Misalignment Spacer

From $4.99

• CNC machined and Zinc plated for corrosion resistance. These Hi-Misalignment spacers will allow for greater operating angle from your heim joints.
• California Residents: WARNING

Synergy Suspension Joints and Rod Ends

From $45.00

• Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry. All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
• California Residents: WARNING

Mountain Off-Road Enterprises Rod Ends

From $31.99

• Super high quality, 52100 bearing steel ball
• Teflon / Kevlar self-lubricating race
• Alloy steel heat-treated body
• They come with a jam nut
• Sold individually
• California Residents: WARNING

RockJock 4x4 Johnny Joints

From $124.45

RockJock 4x4 Johnny Joint Greaseable Bolts

From $12.35

• Includes bolt with zerk fitting installed in it's head, 2 flat washers, and crush nut
• Multiple applications
• Currie Enterprises is preparing for the future by redesigning and manufacturing the components needed to continue offering complete rearends that exceed the original cores in strength, quality, durability and versatility
• California Residents: WARNING

RockJock 4x4 Johnny Joint Weld-On Rod Ends

From $48.45

RockJock 4x4 Narrow Johnny Joints

From $113.05

RockJock 4x4 Front End Housing Johnny Joint Kits

From $212.80

RockJock 4x4 Johnny Joint Rebuild Kits

From $12.35