Welcome Guest
SHOP JEEP PARTS
Call our US-based Jeep Experts
- Home
- Jeep Wrangler (JK) 2016 Parts
- Jeep Wrangler (JK) 2016 Drivetrain & Differential
- Jeep Wrangler (JK) 2016 Axle Assembly
Jeep Wrangler (JK) 2016 Axle Assembly
G2 Axle & Gear JK Core 44 Front Axle Assemblies
G2 Axle & Gear JK Core 44 Front Axle AssembliesFrom $1,999.99
- JK Core 44 Front Axle Assembly
- G2 axle assemblies are made to withstand hard off-road use
- Stronger and more durable than factory Jeep axles
- All G2 axle brackets and weak points are gusseted and reinforced
- Comes fully assemblied with your choice of gear ratio and locker
- Available for the Jeep front axle and the Jeep rear axle
- California Residents: WARNING
From $1,999.99
G2 Axle & Gear XJ RockJock Rear Axle Assemblies
G2 Axle & Gear XJ RockJock Rear Axle AssembliesFrom $3,199.99
- XJ RockJock Rear Axle Assembly
- G2 RockJock axle assemblies are built for the hardcore wheelers and rock crawlers
- AR400 heat-treated skid plate
- 3 Inch D.O.M. steel tubes
- Available for the Jeep front axle and the Jeep rear axle
- California Residents: WARNING
From $3,199.99
G2 Axle & Gear JK Core 44 Rear Axle Assemblies
G2 Axle & Gear JK Core 44 Rear Axle AssembliesFrom $1,799.99
- JK Core 44 Rear Axle Assembly
- G2 axle assemblies are made to withstand hard off-road use
- Stronger and more durable than factory Jeep axles
- All G2 axle brackets and weak points are gusseted and reinforced
- Comes fully assemblied with your choice of gear ratio and locker
- Available for the Jeep front axle and the Jeep rear axle
- California Residents: WARNING
From $1,799.99
G2 Axle & Gear Core 44 Rear Bare Housings
G2 Axle & Gear Core 44 Rear Bare HousingsFrom $1,799.99
- American-made CORE 44 housings
- Feature forged bearing caps
- G-lock adjuster nut system to set backlash and carrier bearing preload
- Additional ribbing on the cast center section
- California Residents: WARNING
From $1,799.99
Dana Spicer Dana 44 Front Axle Assemblies
Dana Spicer Dana 44 Front Axle AssembliesFrom $3,215.99
- The Dana Spicer Ultimate Dana 44 front axle assembly delivers the strength and durability on any trail you take
- SPL 1350 u-joints provides extra protection
- Spicer nickel chromoly steel axle shafts for optimal strength and performance
- Direct bolt-on for the Jeep front axle
- California Residents: WARNING
From $3,215.99
5.0
5.0
(1)
On Sale
Dana Spicer Ultimate Dana 60 Axle Assemblies
Dana Spicer Ultimate Dana 60 Axle AssembliesFrom $5,399.99
- The strongest, most robust axle assembly on the market
- Massive Spicer SPL 70 u-joints—exclusive to Dana
- Provides optimal performance for lifted vehicles with larger tires
- Improved “rock solid” seals for optimal protection from environmental contamination
- Manufactured from cold-forged steel
- Spicer 35 spline SAE-4340 nickel chromoly steel axle shafts
- Warn 35 spline hub locks
- Allowing for wheel bearings to be serviced individually
- Easier to repair and service than unit bearing design
- High-strength, heavy gauge brackets
- Cover face rotated back for greater ground clearance
- Reinforced ribbing on bottom of carrier to prevent hang-ups on rocks or rough terrain
- Selectable electronic locking differentials
- Precision-forged gears offer ideal meshing, strength and durability
- Upper and lower control arms in same location as OE
- Better fit, less adjustment on control arm
- Genuine Made in the USA Spicer® 10" (256 mm) ring and pinion gear
- Precision heat treated for optimal hardness and durability
- Face hobbed for precise mating of gear teeth and a quieter ride
- Lapped to reduce noise and heat
- Spicer 1350 Strap-style/Half-round end yoke
- Axle tubes: 3.5" tube diameter/.370" wall thickness
- Helps prevent steering from being knocked out of alignment
- California Residents: WARNING
From $5,399.99
On Sale
G2 Axle & Gear YJ/XJ Core 44 Rear Axles Assemblies
G2 Axle & Gear YJ/XJ Core 44 Rear Axles AssembliesFrom $3,299.99
- YJ/XJ Core 44 Rear Axle Assembly
- G2 axle assemblies are made to withstand hard off-road use
- Stronger and more durable than factory Jeep axles
- All G2 axle brackets and weak points are gusseted and reinforced
- Comes fully assemblied with your choice of gear ratio and locker
- Available for the Jeep front axle and the Jeep rear axle
- California Residents: WARNING
From $3,299.99
G2 Axle & Gear JK RockJock Rear Axle Assemblies
G2 Axle & Gear JK RockJock Rear Axle AssembliesFrom $3,399.99
- JK RockJock Rear Axle Assembly
- G2 RockJock axle assemblies are built for the hardcore wheelers and rock crawlers
- AR400 heat-treated skid plate
- 3 Inch D.O.M. steel tubes
- Available for the Jeep front axle and the Jeep rear axle
- California Residents: WARNING
From $3,399.99
4.0
4.0
(1)
G2 Axle & Gear JK RockJock Front Axle Assemblies
G2 Axle & Gear JK RockJock Front Axle AssembliesFrom $7,499.99
- JK RockJock Front Axle Assembly
- G2 RockJock axle assemblies are built for the hardcore wheelers and rock crawlers
- AR400 heat-treated skid plate
- 3 Inch D.O.M. steel tubes
- Available for the Jeep front axle and the Jeep rear axle
- California Residents: WARNING
From $7,499.99
TeraFlex Axle Assembly and Housing
TeraFlex Axle Assembly and HousingFrom $1,514.97
- Mutiple applications
- 100% engineered, designed, and hand assembled in the USA with 100% new components
- Ductile cast iron housing
- Bottom oil drain hole
- California Residents: WARNING
From $1,514.97
On Sale
G2 Axle & Gear TJ/LJ Core 44 Rear Axle Assemblies
G2 Axle & Gear TJ/LJ Core 44 Rear Axle AssembliesFrom $3,299.99
- TJ/LJ Core 44 Rear Axle Assembly
- G2 axle assemblies are made to withstand hard off-road use
- Stronger and more durable than factory Jeep axles
- All G2 axle brackets and weak points are gusseted and reinforced
- Comes fully assemblied with your choice of gear ratio and locker
- Available for the Jeep front axle and the Jeep rear axle
- California Residents: WARNING
From $3,299.99
.jpg)
G2 Axle & Gear YJ RockJock Rear Axle Assemblies
G2 Axle & Gear YJ RockJock Rear Axle AssembliesFrom $3,199.99
- YJ RockJock Rear Axle Assembly
- G2 RockJock axle assemblies are built for the hardcore wheelers and rock crawlers
- AR400 heat-treated skid plate
- 3 Inch D.O.M. steel tubes
- Available for the Jeep front axle and the Jeep rear axle
- California Residents: WARNING
From $3,199.99
G2 Axle & Gear TJ/LJ/XJ Core 44 Front Axle Assemblies
G2 Axle & Gear TJ/LJ/XJ Core 44 Front Axle AssembliesFrom $3,599.99
- TJ/LJ/XJ Core 44 Front Axle Assembly
- G2 axle assemblies are made to withstand hard off-road use
- Stronger and more durable than factory Jeep axles
- All G2 axle brackets and weak points are gusseted and reinforced
- Comes fully assemblied with your choice of gear ratio and locker
- Available for the Jeep front axle and the Jeep rear axle
- California Residents: WARNING
From $3,599.99
Jeep Front Axle Housings
Jeep Front Axle HousingFrom $1,348.99
- Factory Jeep axle housings
- Includes inner axle seals
- Carrier bearing caps and bolts
- All brackets for control arms, track bar, shocks, and springs
- California Residents: WARNING
From $1,348.99
G2 Axle & Gear TJ RockJock Rear Axle Assemblies
G2 Axle & Gear TJ RockJock Rear Axle AssembliesFrom $3,399.99
- TJ RockJock Rear Axle Assembly
- G2 RockJock axle assemblies are built for the hardcore wheelers and rock crawlers
- AR400 heat-treated skid plate
- 3 Inch D.O.M. steel tubes
- Available for the Jeep front axle and the Jeep rear axle
- California Residents: WARNING
From $3,399.99
Dynatrac ProRock 44 Front Axle Housings
Dynatrac Pro Rock Front Axle HousingsFrom $2,436.99
- The Dynatrac ProRock 44 Jeep front axle offers incredible strength and unmatched ground clearance in a small package
- Features Dynatrac's strongest end forgings
- Rock-proof nodular-iron Dynatrac diff cover included
- Direct replacements for Dana 30 and Dana 44 front axles in the Jeep JK, TJ, and XJ
- California Residents: WARNING
From $2,436.99
On Sale
Trail Gear Toyota Third Member Assemblies
Trail Gear Toyota Third Member AssemblyFrom $1,124.99
Ships Free
- Trail Gear's fully assembled 3rd members eliminates the hassle of rebuilding your differential
- Ready to drop into your axle saving you time and money
- All new parts, no used housings or internal parts
- Third members feature top quality ring & pinion gears and lockers
- California Residents: WARNING
From $1,124.99
Jeep JK Rubicon Dana 44 Front Axle Housings
Jeep Jeep JK Rubicon Dana 44 Front Axle Housing With 4.10 Gears and Tru- LokFrom $4,886.99
- Restore your vehicle's axle to factory condition performance
- Direct-fit Jeep front axle
- Fits Jeep JK
- California Residents: WARNING
From $4,886.99
TeraFlex Dana 60 Axle Assemblies
TeraFlex Dana 60 Axle AssemblyFrom $8,585.99
- Maximum ground clearance
- Adjustable control arm and track bar mounting locations
- Comes complete with properly matched components
- An ultra-reliable Jeep axle package that exceeds stock axle performance, durability, and reliability
- California Residents: WARNING
From $8,585.99
On Sale
Trail Gear Rock Assault Axle Housings
Trail Gear Rock Assault Axle HousingFrom $1,039.99
Ships Free
- Features axle tubes that have been offset above the housing centerline making the inner axle shafts ride near the bottom of the axle tubes rather than in the center
- Increase of 3/8" in ground clearance under the axle tubes
- Axle tubes made from 5/16 inch thick, high strength DOM steel tubing
- A great upgrade option for Jeep axles and other builds
- California Residents: WARNING
From $1,039.99
Trail Gear Rock Assault Trail Nine Axle Housings
Trail Gear Rock Assault Trail Nine Axle HousingFrom $1,220.99
- Trail Gears Rock Assault Nine Axles housings are built starting with a 1/4in. thick formed shell for the center section. Then Trail Gear attaches a 1/2in. thick mounting face plate. Finally, they install the DOM axle tubes to the center section with the industrys first 3-Point Attachment System, giving the tubes superior support and engagement into the center section. Axle housing is shipped with inner axle seal and seal housing. All backed up with their world famous no questions asked warranty.
- California Residents: WARNING
From $1,220.99
Trail Gear Rock Assault Trail Nine Roller Kit
Trail Gear Rock Assault Trail Nine Roller KitFrom $3,891.99
- Trail Gears Rock Assault Nine Axles housings are built starting with a 1/4in. thick formed shell for the center section. Then Trail Gear attaches a 1/2in. thick mounting face plate. Finally, they install the DOM axle tubes to the center section with the industrys first 3-Point Attachment System, giving the tubes superior support and engagement into the center section. Axle housing is shipped with inner axle seal and seal housing. All backed up with their world famous no questions asked warranty.
- California Residents: WARNING
From $3,891.99
Currie Dana 60 Rear End Unit
Currie Dana 60 Rear End UnitFrom $1,909.00
- Rotated Cover Mounting
- Heavy Duty Casting
- Built In Skid Plate
- All Brackets Welded
- California Residents: WARNING
From $1,909.00
On Sale
Trail Gear Axle Housing
Trail Gear Axle HousingFrom $2,314.99
- Features axle tubes that have been offset above the housing centerline making the inner axle shafts ride near the bottom of the axle tubes rather than in the center
- Increase of 3/8" in ground clearance under the axle tubes
- Axle tubes made from 5/16 inch thick, high strength DOM steel tubing
- A great upgrade option for Jeep axles and other builds
- California Residents: WARNING
From $2,314.99
651 Products
Switch to View Product Groups
Dana Spicer Jeep JK Ultimate Dana 60 Front Axle Assembly 5.38 Ratio - 10005777
- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- U.S. made 10 inch 5.38 ring and pinion
- Electric selectable locker
- Massive SPL-70 U-joints
- 4340 chromoly 35 spline axle shafts
- Servicable wheel bearings
- Heavy duty 3 1/2 inch .370 wall steel tube diameter
- Nodular iron differential cover
- 35 spline Warn locking hubs
- Heavy duty 14 inch dual piston disc brakes
- Plug and play ABS system
- 8 on 6-1/2 inch bolt pattern
- Will require use of aftermarket wheels
- 1350 pinion yoke
- Will require drive shaft modifications.
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
$8,949.99
- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- U.S. made 10 inch 5.38 ring and pinion
- Electric selectable locker
- Massive SPL-70 U-joints
- 4340 chromoly 35 spline axle shafts
- Servicable wheel bearings
- Heavy duty 3 1/2 inch .370 wall steel tube diameter
- Nodular iron differential cover
- 35 spline Warn locking hubs
- Heavy duty 14 inch dual piston disc brakes
- Plug and play ABS system
- 8 on 6-1/2 inch bolt pattern
- Will require use of aftermarket wheels
- 1350 pinion yoke
- Will require drive shaft modifications.
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
Out Of Stock
Order now. Get it first.
Dana Spicer Jeep JK Ultimate Dana 60 Rear Axle Assembly 4.88 Ratio - 2023612-1
- Fitment: Universal Fit
- Direct bolt in for the 2007-2016 Jeep JK All Models
- U.S. Made 9 inch 4.88 Ring and Pinion
- Electric Selectable Locker
- 4340 Chromoly 35 Spline Axle Shafts
- Heavy Duty Full Floating Wheel Bearing Design
- Heavy Duty 3 1/2 inch .390 Wall Steel Tube Diamete
- Nodular Iron Differential Cover
- Heavy Duty 14 inch Dual Piston Disc Brakes
- Plug and Play ABS System
- 8 on 6-1/2 inch Bolt Pattern
- Will Require Use Of Aftermarket Wheels
- 1350 Pinion Yoke
- Will Require Drive Shaft Modifications
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
$5,399.99
?
Ready To Ship
- Fitment: Universal Fit
- Direct bolt in for the 2007-2016 Jeep JK All Models
- U.S. Made 9 inch 4.88 Ring and Pinion
- Electric Selectable Locker
- 4340 Chromoly 35 Spline Axle Shafts
- Heavy Duty Full Floating Wheel Bearing Design
- Heavy Duty 3 1/2 inch .390 Wall Steel Tube Diamete
- Nodular Iron Differential Cover
- Heavy Duty 14 inch Dual Piston Disc Brakes
- Plug and Play ABS System
- 8 on 6-1/2 inch Bolt Pattern
- Will Require Use Of Aftermarket Wheels
- 1350 Pinion Yoke
- Will Require Drive Shaft Modifications
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
Ready To Ship
Dana Spicer Jeep JK Ultimate Dana 60 Rear Axle Assembly 5.38 Ratio - 10005942
- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- U.S. made 9-3/4 inch 4.88 ring and pinion
- Electric selectable locker
- 4340 Chromoly 35 spline axle shafts
- Heavy duty full floating wheel bearing design
- Heavy duty 3 1/2 inch .390 wall steel tube diameter
- Nodular iron differential cover
- Heavy duty 14 inch dual piston disc brakes
- Plug and play ABS system
- 8 on 6-1/2 inch bolt pattern
- Will require use of aftermarket wheels
- 1350 pinion yoke
- Will require drive shaft modifications
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
$5,399.99
- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- U.S. made 9-3/4 inch 4.88 ring and pinion
- Electric selectable locker
- 4340 Chromoly 35 spline axle shafts
- Heavy duty full floating wheel bearing design
- Heavy duty 3 1/2 inch .390 wall steel tube diameter
- Nodular iron differential cover
- Heavy duty 14 inch dual piston disc brakes
- Plug and play ABS system
- 8 on 6-1/2 inch bolt pattern
- Will require use of aftermarket wheels
- 1350 pinion yoke
- Will require drive shaft modifications
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
Out Of Stock
Order now. Get it first.
G2 Jeep JK Rear Core 44 Metric Housing - 67-2052JKR
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Rear bolt in replacement axle
- Uses Metric carrier bearings to allow the use of factory air locker
- 3 X .25 inch DOM heavy duty axle tubes
- 3/8 inch CNC-formed heavy duty brackets
- Spanner nuts for backlash adjustment
- Heavy duty forged bearing caps
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
$1,799.99
?
Ready To Ship
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Rear bolt in replacement axle
- Uses Metric carrier bearings to allow the use of factory air locker
- 3 X .25 inch DOM heavy duty axle tubes
- 3/8 inch CNC-formed heavy duty brackets
- Spanner nuts for backlash adjustment
- Heavy duty forged bearing caps
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
Ready To Ship
Dana Spicer Dana 44 Ultimate JK Front Axle Assembly 4.56 Ratio - 10010520
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44
- 4.56 ratio
- Front
- Electric locker
- 5/16 inch thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Spicer Life Series (SPL) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer performance gasket
- Selectable electronic locking differential
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
$3,895.99
?
Ready To Ship
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44
- 4.56 ratio
- Front
- Electric locker
- 5/16 inch thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Spicer Life Series (SPL) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer performance gasket
- Selectable electronic locking differential
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
Ready To Ship
Dana Spicer Jeep JK Ultimate Dana 60 Front Axle Assembly 4.88 Ratio - 10005778
- Fitment: Universal Fit
- Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- U.S. Made 10inch 4.88 Ring and Pinion
- Electric Selectable Locker
- Massive SPL-70 U Joints
- 4340 Chromoly 35 Spline Axle Shafts
- Servicable Wheel Bearings
- Heavy Duty 3 1/2Inch .370 Wall Steel Tube Diamete
- Nodular Iron Differential Cover
- 35 Spline Warn Locking Hubs:Heavy Duty 14 Inch Dual Piston Disc Brakes
- Plug and Play ABS System
- 8 on 6.5Inch Wheel Bolt Pattern
- Will Require Use Of Aftermarket Wheels
- 1350 Pinion Yoke
- Will Require Drive Shaft Modifications
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
$8,949.99
?
Ready To Ship
- Fitment: Universal Fit
- Fits 2007 to 2017 JK Wrangler, Rubicon and Unlimited
- 2 and 4-door models
- U.S. Made 10inch 4.88 Ring and Pinion
- Electric Selectable Locker
- Massive SPL-70 U Joints
- 4340 Chromoly 35 Spline Axle Shafts
- Servicable Wheel Bearings
- Heavy Duty 3 1/2Inch .370 Wall Steel Tube Diamete
- Nodular Iron Differential Cover
- 35 Spline Warn Locking Hubs:Heavy Duty 14 Inch Dual Piston Disc Brakes
- Plug and Play ABS System
- 8 on 6.5Inch Wheel Bolt Pattern
- Will Require Use Of Aftermarket Wheels
- 1350 Pinion Yoke
- Will Require Drive Shaft Modifications
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
Ready To Ship
G2 CORE 44 Rear Metric Axle Housing - 67-2052JKRRH
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- 4" lift with right hand drive
- Dana 44 axle
- California Residents: WARNING
Lowest Price! Guaranteed!
$1,799.99
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- 4" lift with right hand drive
- Dana 44 axle
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
Ships Directly From Manufacturer
May take additional processing time.
Dana Spicer Dana 44 Ultimate JK Front Axle Assembly 4.88 Ratio - 10010521
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44
- 4.88 ratio
- Front
- Electric locker
- 5/16 inch thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Spicer Life Series (SPL) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer performance gasket
- Selectable electronic locking differential
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
$3,895.99
?
Ready To Ship
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44
- 4.88 ratio
- Front
- Electric locker
- 5/16 inch thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Spicer Life Series (SPL) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer performance gasket
- Selectable electronic locking differential
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
Ready To Ship
Dana Spicer Dana 44 Ultimate JK Front Axle Assembly 4.10 Ratio - 10010455
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44
- 4.10 ratio
- Front
- Electric locker
- 5/16 inch thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Spicer Life Series (SPL) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer performance gasket
- Selectable electronic locking differential
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
$3,895.99
?
Ready To Ship
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44
- 4.10 ratio
- Front
- Electric locker
- 5/16 inch thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Spicer Life Series (SPL) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer performance gasket
- Selectable electronic locking differential
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
Ready To Ship
Dana Spicer Dana 44 Ultimate JK Front Axle Assembly 3.73 Ratio - 10010519
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44
- 3.73 ratio
- Front
- Electric locker
- 5/16 inch thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Spicer Life Series (SPL) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer performance gasket
- Selectable electronic locking differential
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
$3,895.99
?
Ready To Ship
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44
- 3.73 ratio
- Front
- Electric locker
- 5/16 inch thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Spicer Life Series (SPL) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer performance gasket
- Selectable electronic locking differential
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
Ready To Ship
Currie Extreme 60 Front Crate Axle Assembly (ARB Locker - 5.38 Gear Ratio) - CE-KF6501A53
- Fitment: Direct Fit
- 5x5.5 Bolt pattern with 1/2 inch studs
- 70 inch WMS
- ARB Locker - 5.38 ratio
- 35-spline (1.5 inch diameter) 4340 Chromoly inner and outer axle shafts
- 1350 u-joints
- Stage-2 high-pinion nodular iron radius bottom center section with thicker walls and webbing
- AR400 hardened steel skid plate
- Differential Cover: nodular-iron cover, Red
- 3-1/2 inch diameter, .375 wall DOM tube
- Nodular iron bearing caps
- Large diameter front pinion bearing matched to rear bearing
- High volume flow-thru recirculating oil system
- Standard Dana 60 gear set, compatible with super 60 reverse cut gears
- Heavy duty forged 1-ton inner and outer knuckles
- 1 ton unit bearings with JK tone rings installed for ABS and ESP retention
- Warn Premium locking 35-spline hubs
- 13.25 inch vented rotors with zinc plated caliper brackets
- Dual piston calipers with increased pad contact area
- Modular extreme duty 1-5/8 inch diameter, .250 wall heat treated chromoly tube with 1-1/4 inch forged tie rod ends
- Heavy gauge 3/16 inch steel mounting brackets with multiple mounting locations
- Currie Johnny Joints installed with 1/2 inch greaseable bolts
- Ram mounting brackets welded to housing, setup for PSC 8 inch travel steering ram
- Complete front axle assembly, reusing only the stock ABS sensors
- Recommended maximum 40 inch tire size
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
$9,499.00
- Fitment: Direct Fit
- 5x5.5 Bolt pattern with 1/2 inch studs
- 70 inch WMS
- ARB Locker - 5.38 ratio
- 35-spline (1.5 inch diameter) 4340 Chromoly inner and outer axle shafts
- 1350 u-joints
- Stage-2 high-pinion nodular iron radius bottom center section with thicker walls and webbing
- AR400 hardened steel skid plate
- Differential Cover: nodular-iron cover, Red
- 3-1/2 inch diameter, .375 wall DOM tube
- Nodular iron bearing caps
- Large diameter front pinion bearing matched to rear bearing
- High volume flow-thru recirculating oil system
- Standard Dana 60 gear set, compatible with super 60 reverse cut gears
- Heavy duty forged 1-ton inner and outer knuckles
- 1 ton unit bearings with JK tone rings installed for ABS and ESP retention
- Warn Premium locking 35-spline hubs
- 13.25 inch vented rotors with zinc plated caliper brackets
- Dual piston calipers with increased pad contact area
- Modular extreme duty 1-5/8 inch diameter, .250 wall heat treated chromoly tube with 1-1/4 inch forged tie rod ends
- Heavy gauge 3/16 inch steel mounting brackets with multiple mounting locations
- Currie Johnny Joints installed with 1/2 inch greaseable bolts
- Ram mounting brackets welded to housing, setup for PSC 8 inch travel steering ram
- Complete front axle assembly, reusing only the stock ABS sensors
- Recommended maximum 40 inch tire size
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
Out Of Stock
Order now. Get it first.
Currie Jeep JK Dana 60 III Rear End Housing - JK-RJIIIR4
- Fitment: Universal Fit
- RockJock Dana 60 III Rear End Unit
- Incl. Brackets Mounted
- Set 10 Ends
- Skid Plate
- HD Steel Diff Cover
- Yoke
- Direct replacement for Jeep JK
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
$1,979.00
- Fitment: Universal Fit
- RockJock Dana 60 III Rear End Unit
- Incl. Brackets Mounted
- Set 10 Ends
- Skid Plate
- HD Steel Diff Cover
- Yoke
- Direct replacement for Jeep JK
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
Ships Directly From Manufacturer
May take additional processing time.
G2 Rock Jock Dana 60 Front Axle Assembly 5.13 Ratio 35 Spline Axles With Eaton E Locker - JKRJF513E
- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Rock Jock Dana 60 Front Axle Assembly
- 5.13 Gear Ratio
- Eaton E Locker
- Currie 35 Spline Axle Shafts
- 1480 Axle U Joints
- 5 on 5 1/2 Bolt Pattern
- Accepts Factory brake calipers And Wheel Sensors
- 13" Vented Rotors
- 1350 Series Yoke
- Ductile Iron Housing Center Section
- AR 400 Heat Treated Bottom Skid Plate
- 3 inch D.O.M. Steel Tubes
- 1 Ton Steering Knuckles With high steer arm
- 1 Ton ball joints
- locking hubs sold separately
- May Require Driveshaft Modifications
- California Residents: WARNING + View More Specs - View Less Specs
$7,999.99
?
Ready To Ship
G2 Rock Jock Dana 60 Front Axle Assembly 5.13 Ratio 35 Spline Axles With Eaton E Locker - JKRJF513E
$7,999.99
- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Rock Jock Dana 60 Front Axle Assembly
- 5.13 Gear Ratio
- Eaton E Locker
- Currie 35 Spline Axle Shafts
- 1480 Axle U Joints
- 5 on 5 1/2 Bolt Pattern
- Accepts Factory brake calipers And Wheel Sensors
- 13" Vented Rotors
- 1350 Series Yoke
- Ductile Iron Housing Center Section
- AR 400 Heat Treated Bottom Skid Plate
- 3 inch D.O.M. Steel Tubes
- 1 Ton Steering Knuckles With high steer arm
- 1 Ton ball joints
- locking hubs sold separately
- May Require Driveshaft Modifications
- California Residents: WARNING + View More Specs - View Less Specs
Ready To Ship
G2 CORE 44 Rear Axle With 4.56 Ratio and Placer 35 Spline Auburn Ected Differential - C4JMR456MP5
- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Rear with 4.56 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 35 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
- California Residents: WARNING + View More Specs - View Less Specs
$3,499.99
G2 CORE 44 Rear Axle With 4.56 Ratio and Placer 35 Spline Auburn Ected Differential - C4JMR456MP5
$3,499.99
- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Rear with 4.56 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 35 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
- California Residents: WARNING + View More Specs - View Less Specs
Out Of Stock
Order now. Get it first.
Dana Spicer Dana 44 Ultimate JK Front Axle Assembly 4.10 Ratio - 10032862
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44
- 4.10 ratio
- Front
- Standard differential
- 5/16 inch thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Spicer Life Series (SPL) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer performance gasket
- Selectable electronic locking differential
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
$3,594.99
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Dana 44
- 4.10 ratio
- Front
- Standard differential
- 5/16 inch thick axle tubes for improved strength, rigidity and durability
- Redesigned and thicker brackets
- Spicer chromoly axle shafts
- Spicer Life Series (SPL) 1350 u-joints with triple lip seals and full-circle clips
- Performance differential cover and Spicer performance gasket
- Selectable electronic locking differential
- Improved caster angle and pinion angle optimized for lifted Jeeps
- Increased gross axle weight rating
- Dana recommends using military tested and approved 75W-140 synthetic lube (not included)
- California Residents: WARNING + View More Specs - View Less Specs
Lowest Price! Guaranteed!
Out Of Stock
Order now. Get it first.
G2 Rock Jock Dana 60 Rear Axle Assembly 4.10 Ratio 35 Spline Axles With ARB Air Locker And Disc Brakes - TJRJR410ARBD
- Fitment: Universal Fit
- 97-06 Wrangler TJ/LJ
- Rock Jock Dana 60 Rear High Pinion Axle Assembly
- 4.10 Gear Ratio
- ARB Air Locker
- G2 35 Spline Axle Shafts
- 1350 Series Yoke
- Ductile Iron Housing Center Section
- AR 400 Heat Treated Bottom Skid Plate
- 3 inch D.O.M. Steel Tubes
- Disc Brakes With parking brake
- Air compressor sold separately
- May Require Driveshaft Modifications
- Requires Use Of Aftermarket Brake Cables (QTY) 2 TER4304169
- Some Factory Aluminum Wheels May Require Minor Caliper Clearancing
- California Residents: WARNING + View More Specs - View Less Specs
$4,224.99
- Fitment: Universal Fit
- 97-06 Wrangler TJ/LJ
- Rock Jock Dana 60 Rear High Pinion Axle Assembly
- 4.10 Gear Ratio
- ARB Air Locker
- G2 35 Spline Axle Shafts
- 1350 Series Yoke
- Ductile Iron Housing Center Section
- AR 400 Heat Treated Bottom Skid Plate
- 3 inch D.O.M. Steel Tubes
- Disc Brakes With parking brake
- Air compressor sold separately
- May Require Driveshaft Modifications
- Requires Use Of Aftermarket Brake Cables (QTY) 2 TER4304169
- Some Factory Aluminum Wheels May Require Minor Caliper Clearancing
- California Residents: WARNING + View More Specs - View Less Specs
Out Of Stock
Order now. Get it first.
G2 Rock Jock Dana 60 Rear Axle Assembly 5.38 Ratio 35 Spline Axles With Detroit Locker And Disc Brakes - TJRJR538DLD
- Fitment: Universal Fit
- 97-06 Wrangler TJ/LJ
- Rock Jock Dana 60 Rear High Pinion Axle Assembly
- 5.38 Gear Ratio
- Detroit Locker
- G2 35 Spline Axle Shafts
- 1350 Series Yoke
- Ductile Iron Housing Center Section
- AR 400 Heat Treated Bottom Skid Plate
- 3 inch D.O.M. Steel Tubes
- Disc Brakes With parking brake
- May Require Driveshaft Modifications
- Requires Use Of Aftermarket Brake Cables (QTY) 2 TER4304169
- Some Factory Aluminum Wheels May Require Minor Caliper Clearancing
- California Residents: WARNING + View More Specs - View Less Specs
$3,974.99
?
Ready To Ship
- Fitment: Universal Fit
- 97-06 Wrangler TJ/LJ
- Rock Jock Dana 60 Rear High Pinion Axle Assembly
- 5.38 Gear Ratio
- Detroit Locker
- G2 35 Spline Axle Shafts
- 1350 Series Yoke
- Ductile Iron Housing Center Section
- AR 400 Heat Treated Bottom Skid Plate
- 3 inch D.O.M. Steel Tubes
- Disc Brakes With parking brake
- May Require Driveshaft Modifications
- Requires Use Of Aftermarket Brake Cables (QTY) 2 TER4304169
- Some Factory Aluminum Wheels May Require Minor Caliper Clearancing
- California Residents: WARNING + View More Specs - View Less Specs
Ready To Ship
G2 Metric CORE 44 Rear Axle With 4.56 Ratio and Placer 35 Spline ARB Air Locker Differential - C4JMR456AP5
- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Rear with 4.56 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 35 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
- California Residents: WARNING + View More Specs - View Less Specs
$3,899.99
- Fitment: Universal Fit
- 07-18 Wrangler JK, 2 & 4 Door
- Rear with 4.56 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 35 spline Placer axle shafts
- Factory style flange pinion yoke
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
- California Residents: WARNING + View More Specs - View Less Specs
Out Of Stock
Order now. Get it first.
G2 CORE 44 Front Axle With 4.56 Ratio and 35 Spline Auburn Ected Differential - C4JMFS456MP5
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- High Pinion Front with 4.56 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- Standard axle caster for 0-4 inch lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
- California Residents: WARNING + View More Specs - View Less Specs
$4,399.99
G2 CORE 44 Front Axle With 4.56 Ratio and 35 Spline Auburn Ected Differential - C4JMFS456MP5
$4,399.99
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- High Pinion Front with 4.56 gear ratio and Auburn Ected
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- Standard axle caster for 0-4 inch lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
- California Residents: WARNING + View More Specs - View Less Specs
Out Of Stock
Order now. Get it first.
G2 CORE 44 Front Axle With 4.88 Ratio and 35 Spline ARB Air Locker Differential - C4JMFS488AP5
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- High Pinion Front with 4.88 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- Standard axle caster for 0-4 inch lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
- California Residents: WARNING + View More Specs - View Less Specs
$4,599.99
G2 CORE 44 Front Axle With 4.88 Ratio and 35 Spline ARB Air Locker Differential - C4JMFS488AP5
$4,599.99
- Fitment: Direct Fit
- 07-18 Wrangler JK, 2 & 4 Door
- High Pinion Front with 4.88 gear ratio and ARB Air Locker
- Utilizes new generation 8.8in. JK 44 ring & pinion with larger pinion shaft
- USA Made 4340 Chromalloy 1.5in. 35 spline Placer axle shafts
- Heavy duty Dana Spicer 5-7166X Axle U-Joints
- Factory style flange pinion yoke
- Standard axle caster for 0-4 inch lifts
- Massive forged inner C-ends
- Integrated skid plates on lower control arm mounts
- Heavy-duty 1/4in. laser cut brackets
- Heavy duty 3in. diameter 5/16in. DOM tubes
- Reinforcing ribs for added strength and protection
- Uses metric Rubicon style carrier bearings
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
- California Residents: WARNING + View More Specs - View Less Specs
Out Of Stock
Order now. Get it first.
G2 Rock Jock Dana 60 Rear Axle Assembly 5.13 Ratio 35 Spline Axle with Eaton E-Locker and Disc Brakes - TJRJR513ED
- Fitment: Universal Fit
- 97-06 Wrangler TJ/LJ
- RockJock Dana 60 Rear High Pinion Axle Assembly
- 5.13 Gear Ratio
- Eaton E Locker
- G2 35 Spline Axle Shafts
- 1350 Series Yoke
- Ductile Iron Housing Center Section
- AR 400 Heat Treated Bottom Skid Plate
- 3 inch D.O.M. Steel Tubes
- Disc Brakes With parking brake
- May Require Driveshaft Modifications
- Requires Use Of Aftermarket Brake Cables (QTY) 2 TER4304169
- Some Factory Aluminum Wheels May Require Minor Caliper Clearancing
- California Residents: WARNING + View More Specs - View Less Specs
$4,424.99
- Fitment: Universal Fit
- 97-06 Wrangler TJ/LJ
- RockJock Dana 60 Rear High Pinion Axle Assembly
- 5.13 Gear Ratio
- Eaton E Locker
- G2 35 Spline Axle Shafts
- 1350 Series Yoke
- Ductile Iron Housing Center Section
- AR 400 Heat Treated Bottom Skid Plate
- 3 inch D.O.M. Steel Tubes
- Disc Brakes With parking brake
- May Require Driveshaft Modifications
- Requires Use Of Aftermarket Brake Cables (QTY) 2 TER4304169
- Some Factory Aluminum Wheels May Require Minor Caliper Clearancing
- California Residents: WARNING + View More Specs - View Less Specs
Out Of Stock
Order now. Get it first.
G2 Axle and Gear CORE 44 Front Axle Assembly, 4.10 Ratio and ARB Air Locker - C4TSFS410AC0
- Fitment: Universal Fit
- 97-06 Wrangler TJ/LJ
- 84-01 Cherokee XJ
- Massive forged inner C-end
- Integrated skid plates on lower control arm mount
- Heavy-duty 1/4" laser cut brackets
- Heavy duty 3" diameter 5/16" DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
- Utilizes new generation JK 44 ring & pinion
- Gear Ratio: 4.10
- Locker: ARB Air Locker
- SAE Bearings
- 30 Spline G2 Chromoly Axles
- California Residents: WARNING + View More Specs - View Less Specs
$3,949.99
G2 Axle and Gear CORE 44 Front Axle Assembly, 4.10 Ratio and ARB Air Locker - C4TSFS410AC0
$3,949.99
- Fitment: Universal Fit
- 97-06 Wrangler TJ/LJ
- 84-01 Cherokee XJ
- Massive forged inner C-end
- Integrated skid plates on lower control arm mount
- Heavy-duty 1/4" laser cut brackets
- Heavy duty 3" diameter 5/16" DOM tubes
- Reinforcing ribs for added strength and protection
- Heavy duty forged bearing caps
- Spanner nuts for backlash adjustment
- Heat-treated aluminum diff cover with cooling fins
- Utilizes new generation JK 44 ring & pinion
- Gear Ratio: 4.10
- Locker: ARB Air Locker
- SAE Bearings
- 30 Spline G2 Chromoly Axles
- California Residents: WARNING + View More Specs - View Less Specs
Out Of Stock
Order now. Get it first.
Trail Gear Toyota Third Member Assembly V6 5.29 Spool - 140069-1-KIT
- Fitment: Universal Fit
Qualifies for Free Shipping
$1,272.99
- Fitment: Universal Fit + View More Specs - View Less Specs
Qualifies for Free Shipping
Ready To Ship
Ships Free
G2 Rock Jock Dana 60 Rear Axle Assembly 4.88 Ratio 35 Spline Axles With ARB Air Locker - TJRJR488ARB
- Fitment: Universal Fit
- 97-06 Wrangler TJ/LJ
- Rock Jock Dana 60 Rear High Pinion Axle Assembly
- 4.88 Gear Ratio
- ARB Air Locker
- G2 35 Spline Axle Shafts
- 1350 Series Yoke
- Ductile Iron Housing Center Section
- AR 400 Heat Treated Bottom Skid Plate
- 3 inch D.O.M. Steel Tubes
- Air compressor sold separately
- May Require Driveshaft Modifications
- California Residents: WARNING + View More Specs - View Less Specs
$3,699.99
G2 Rock Jock Dana 60 Rear Axle Assembly 4.88 Ratio 35 Spline Axles With ARB Air Locker - TJRJR488ARB
$3,699.99
- Fitment: Universal Fit
- 97-06 Wrangler TJ/LJ
- Rock Jock Dana 60 Rear High Pinion Axle Assembly
- 4.88 Gear Ratio
- ARB Air Locker
- G2 35 Spline Axle Shafts
- 1350 Series Yoke
- Ductile Iron Housing Center Section
- AR 400 Heat Treated Bottom Skid Plate
- 3 inch D.O.M. Steel Tubes
- Air compressor sold separately
- May Require Driveshaft Modifications
- California Residents: WARNING + View More Specs - View Less Specs
Out Of Stock
Order now. Get it first.