Superchips Edge Accessory System Universal Sensor Input
The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Superchips TrailDash. This means you can add custom temperature, pressure, Air/Fuel and even Travel/Position gauges to your TrailDash!
Superchips Edge Accessory System Ambient Temperature Sensor
If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a -40?F to 230?F Waterproof 0.2? diameter sensor ready to plug into the Universal Sensor Input system. Now you?ll never wonder what outside air temperature is again!
The EAS Pressure Sensor is a 0 - 100 PSIg 1/8? NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). The Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use the Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more.
Superchips Edge Accessory System Temperature Sensor
The EAS Temperature Sensor is a -40?F to 300?F 1/8? NPT supplied with the connectors to plug directly into the Universal Sensor Input System. Using the EAS Temperature Sensor you can monitor Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Use this in conjunction with the Universal Sensor Input to allow you to view critical temperatures with the most state-of-the-art product on the market today.
Trail Gear's full line of Hose Fittings will help you get the job done right.If you're the type that wants to tap your own box, we have the fitting you need to do it. The fitting has a male 1/4 inch pipe fitting on one end and male #6 JIC fitting on the other end. Two fittings are required for each steering box conversion.
Stock replacement throttle cable for carburetor equipped Samurai's. Includes nuts on carburetor end. Take just a few minutes to install. If you throttle cable is sticking or does not move freely, it may be time for a replacement.