We Pay Your Sales Tax + FREE SHIPPING on Orders Over $50*

Warn 9.0Rc Rock Crawling Winch - 71550

Part Number: WAR71550


  • Line Pull: 9000
  • Line Diameter: 3/8
  • Remote Control: 12 ft lead
  • Line Length: 50
  • Voltage: 12-volt
  • Motor: 4.8 HP
  • Fitment: Universal Fit
  • Fairlead: Hawse
  • Gear Ratio: 216:1
  • Line Type: Synthetic Rope


  • Rated line pull = 9000 lbs.
  • Voltage: 12V
  • Motor: = 4.8 HP
  • Remote control and Remote switch, 12 ft. lead
  • Gear Ratio: = 216.1
  • Weight: 54 lbs.
  • Wire Rope = 50 ft. of 3/8 Synthetic
  • Fairlead = Hawse
  • Type of Winch: Electric


Built for rock crawling. A low-profile design, 50' of lightweight 3/8 synthetic rope, a polished aluminum hawse fairlead, and a 9,000 lb. pulling capacity make the 54 lb. 9.0Rc the ultimate winch for rock crawlers. The winch's strong synthetic line features a heat-resistant Nomex abrasion sleeve, a high temperature urethane coating, and a unique self-tightening rope attachment to keep the line securely on the drum. The multi-segment cam-actuated brake, extreme-duty winch sealing, glossy red paint job over a primer base, and 360� swiveling hook make this winch great for competition.

9.0Rc Specs/Part Numbers[*]Part Number: 71550[*]Rated Line Pull: 9000 lbs. (4080 kgs.) single-line[*]Motor: Series Wound, 12V 4.8 hp[*]Remote Control: Remote, 12' (3.7m) lead, S2 elements, integrated flashlight[*]Geartrain: 3-Stage Planetary[*]Gear Ratio: 216:1[*]Lubrication: Aeroshell #17[*]Clutch (freespooling): Sliding Ring Gear[*]Brake: Automatic Direct Drive Cone[*]Drum Diameter/Length: 2.75/4.75 (7.0cm/12cm)[*]Weight: 54 lbs. (24.8 kgs)[*]Rope: 50', 3/8 Synthetic Rope[*]Fairlead: Polished Aluminum Hawse[*]Recommended Battery: 650 CCA minimum for winching[*]Battery Leads: 2 gauge, 72 (1.83m)[*]Finish: Chromate with high-gloss red paint[*]Nuts/Bolts: PN 39625

Question & Answers

1 Answered question

Will this winch fit on the body armor jk bumper with grill guard if it does does it have to be drilled in the winch plate bracket or does it fit the existing holes

Asked by Night crawler from Johnston city Illinois on

This Warn 9.0Rc Rock Crawling Winch will bolt directly to the winch mount on your bumper. Thanks!

Answered by Craig R. from Johnston city Illinois on


In 1948, Arthur Warn founded Warn Industries to construct locking hubs for surplus World War II Jeeps. Ten years later, the Warn winch was manufactured to fill the need for a reliable recovery tool to aid off-roaders stuck in challenging situations. Since then, Warn has grown to offer a wide range of gear with the hallmarks of durability and affordability. 1988 spawned the aftermarket industry�s first ATV winch and today their PowerSports line of winches ranks among the most esteemed in the industry and jeepers call on Warn for electric, hydraulic and severe duty components that get the job done. Shop Warn Now


We Pay The Sales Tax