These new Overhead Sound Wedges from Vertically Driven Products come with 6.5 high-output speakers, an adjustable dome/map light in each, and all necessary wiring and mounting hardware. The black textured plastic housing is tough and weather-resistant. Fits in all 1987-06 Wranglers. Drilling required for installation in 1987-95 Wranglers.
I was replacing factory speaker pods that contained a maximum of a 5.25" speaker. These hold a 6.5" speaker, but the ones that come with the pods are very low quality, and if you appreciate good sound, they will have to be replaced. Be careful about what speakers you choose, the holes in the pods are very large, and some 6.5" speakers will almost fall through them, making screwing them down difficult. They are "almost" a bolt-in replacement for '03 Wranglers. The wiring harness that is in the pods use a different connector then the factory units. I had to remove the factory speaker pod wiring and install it into the VDP pods. To do this I had to enlarge the wiring holes in the pods to 3/4" dia. Not a big chore, but it lengthened the installation time. It says the dome/map lights are "adjustable". If On/Off is "adjustable", then I guess they are. Otherwise, a usable utilitarian speaker pod.
I have a 1997 TJ Sahara I just added a smittybuilt cage and had to remove the sound bar will these fit in the corners to replace the sound bar? Couldn't find a length to check measurement. Thank You!
Asked by Greg from United States on
Greg, the sound wedges should fit with no problem. they are 14.5" by 9" by 4" thick so you should have plenty of space to get them in your roll bar, Hope this helps!
Answered by JamieEXT4917 from United States on
Greetings from Finland, I received these sound wedges as a gift. That said I have a 1997 Jeep Wrangler TJ and there is no pre wiring like some Wranglers have. Query what I need to wire these up. Do you have the necessary wiring and screws to bolt these on the rollbar. Please advise. br Tom
Asked by Tom from Helsinki, Finland on
Hi Tom, This sound bar comes with the wire pigtail, but does not include the long wire that runs along the sport bar and down to your fuse box. We do not handle that additional wire, thanks for the inquiry!
Answered by Jim G from Helsinki, Finland on
how do they attach to the roll bar? do they plug in to the factory connector (for the soundbar)?
Asked by the black toad from so cal on
The Black Toad, the Vertically Driven Products Overhead Sound Wedges attach to the roll bar with 2 screws on the sides, and 1 post through the middle portion of the roll bar. They use the factory connection for wiring. If you have any other questions, please give me a call! Thanks.
Answered by Sara H. Ext 874 from so cal on
Long Beach, California-based Vertically Driven Products makes Jeep accessories for JKs, TJs, CJs and YJs. Their line of Jeep exterior products includes full and brief tops, cab covers and stubby bumper kits and interior ones include sound bars and wedges, locking consoles and storage vaults. VDP accessories have a reputation as affordable, reliable and highly functional and they are known for their off-road capability. Chose from nylon mesh tops with American flag and pirate designs, black neoprene grab handles, tube coolers and a host of other accessories to make wheeling more enjoyable. Shop Vertically Driven Products Now