Save Up To $235 On Tires In May! | Click here
Synergy MFG's Jeep JL/JT Front Track Bar and Sector Shaft Brace is designed to better distribute the increased load the frame side track bar bracket encounters on a lifted Jeep and supports the steering box sector shaft from excessive deflection. A track bar bracket or steering box failure is a quick way to end your day. A lift and large tires can easily push these components past their capacity. Reinforce your front frame side track bar bracket and sector shaft with Synergy's Front Track Bar and Sector Shaft Brace.
This is not a replacement track bar bracket. This is a brace to reinforce the stock frame-side front track bar bracket.
If your stock track bar bracket is damaged, complete required repairs before installing this product.
No bump stop spacing is required when used in conjunction with the 8875-01 Synergy MFG Front Track Bar.
If using the stock front track bar, a minimum 2" of bump stop spacing is required.
If using an aftermarket front track bar, the front springs should be removed and the suspension cycled to full bump to determine the bump stop spacing required to prevent the track bar from contacting the sector shaft nut, or any other interference.
For over a decade, aftermarket industry innovator Synergy Manufacturing has been producing high-end performance components for 4x4s. Known for manufacturing quality suspension systems and accessories, Synergy also has an extensive line of axle upgrades, steering components and skid plates and their synergistic approach ensures that the sum of components outperforms their individual parts. The company thoroughly tests their designs on the Hammers and Rubicon trails where coil springs, shock mounts and control arms for Jeeps can show their true mettle. Replacing weary hardware with Synergy components is easy on the wallet, easy to install and will correct your camber and optimize off-road performance. Shop Synergy Manufacturing Now