The all new reinforced cage kits come with everything you'll need to strengthen your factory roll bar into a solid foundation if a roll over takes place. We start off with 1020 .120 Wall DOM tubing which is one of the strongest materials available. Each kit includes the new Knuckle System that attaches to the factory roll bar, using a unique pivot and fastening point on one end and grade 10 fasteners on the other. Making it one of the strongest and the most solid mounts available for your Jeep. All of our cages were engineered to bolt-in and require no modifications to the vehicle to ensure a rock solid install while creating the strongest cage kit available. This item requires a $40 oversize fee for shipping.
Followed instructions for one of the easiest installs I have done! It has super support and looks that can't be beat!
This is a nice knock off of the Rockhard made in the USA cage kit, out sourced to China. Fit was reasonable, the knuckles were hit or miss on fitment. The ones around the factory door bars had huge gaps. The supposed Grade 10 hardware is prone to stripping. I had to remove some bolts for readjustment and was disappointed. The factory door surrounds for hard dooors with a soft top took much trimming to fit properly. The cage kit when tighened up pulled the winshiel frame in (yes I losened up the spreader bar bolts) The front hoop down bars, which tie into the dash were the culprit. Took a HiLift jack to spread the bars properly. From a saftey standpoint I am really dissapoionted in the grab handles, think they will meet my Sawsall real soon. The padding kit is an absoloute joke, white stryofoam packageing for padding, stitched up plastic covewrs that wern't much thicker than a sandwich bag and covers that no way interfaced with the factory. I bought Morosco race certified 36in sticks as well as Morosco offset bar pads. The Smittybilt covers didnt begin to fit. In hindsight I should have stepped up for the Rockhard cover kits. I spent $180 on the quality pads for the driver and passenger and another $75 for Wrapz velcro covers. For the money this kit is a good value, however attention to detail is not whayt it used to be at Smittybilt.
The collars will not close. But you can get them tight with your own tools, the supplied are no good. They will strip and bend easily. If you follow the directions it will be ok. Only lacking in those would be the A pillar install. The backing hardware needs to be flipped and can be a pain. 2 people required to install or it will be very difficult. Another tip is to install every before you put it in the jeep. It will be easier in the long run.
I have a 2001 TJSAHARA and I was wondering how well will this cage hold in a rollover?
Asked by RIDGERUNNER from KNOXVILLE TN on
Hi RIDGERUNNER, This Smittybilt SRC Roll Cage Kit, 1997-2006 Jeep TJ Wrangler & Rubicon, 7-Piece cage is a heavy duty kit designed for safety and not just looks. It weighs 115 lbs so it's very stout and will provide protection, thank you for your question!
Answered by Jim G Ext 4806 from KNOXVILLE TN on
I want to verify that this cage kit will work with a Trektop NX and retain use of the sunrider sunroof feature.
Asked by Dave M. from Elk Grove Village, IL on
Hi Dave M, This Smittybilt SRC Roll Cake Kit, 1997-2006 Jeep TJ Wrangler & Rubicon, 7-Piece kit won't work with the Bestop Trektop NX, but does fit with their Supertop NX. Hope this helps, thank you for your inquiry.
Answered by Jim G Ext 4806 from Elk Grove Village, IL on
Was wondering if once installed if the sound bar can be re-installed or will that not fit any longer
Asked by Mike from Manchester, CT on
Mike, the Smittybilt SRC Roll Cage Kit, 1997-2006 Jeep TJ Wrangler & Rubicon, 7-Piece can't be used with a sound bar but if you check out the sound pods like the ones here: http://www.4wd.com/Interior-Parts-Accessories/Supreme-Overhead-Sound-Wedges.aspx?t_c=9&t_s=500&t_pt=7771&t_pn=VDP794001 will work with it. Hope this helps!
Answered by Zach O. ext 4939 from Manchester, CT on
For 60 years Smittybilt has been fabricating aftermarket parts and today their products include Jeep tops, bumpers, lighting, winches and trail gear. Off-roaders count on the company's innovative parts like the original nerf bar side steps to equip their Jeeps for the trail and day-to-day driving. Pairing affordability without compromising quality is the hallmark of Smittybilt and the manufacturer's reputation carries over to products like its Overlander Series of tents, Adventure Boxes and SEMA award-winning magnetic trail skins for Jeeps. Smittybilt offers over 2,000 interior and exterior parts and accessories for 4x4s with multiple capabilities for jeepers of all levels. Shop Smittybilt Now
We Pay Your Sales Tax! Limited Time Only!