When you need the toughest, most durable bumper system out there, look to the Smittybilt Rock Crawler Series! These heavy-duty bumpers are designed for off road use and abuse! Durable powder coat painted 2 inch tubes and 1/4 inch steel plate protects your front end from large rocks. Each bumper has been designed with sloping ends for greater tire travel and enhanced entry and exit.
Looks great and great price! Sticks out further then I thought. Save your top bumper cover and cut it to fill gap between bumper and grill. Need to extend the fog light harness to reach new location. One of the corners arrived dinged (missing some paint/powder coat). No reply from 4wd.com about the damage. Instructions said to redrill but didn't need to on my 2014 jku rubicon. Did I mention it is heavy? It is! I have a leveling kit and it dropped the front 1/2 inch which will help rear brake wear vs front. No need to relocate the vac pump. Inside mounting bolts can be reached from underneath with a box wrench. Did it solo and had no problems.
Bought the SRC Carbine Mid Front Bumper on a Tuesday and had it delivered, free shipping, on Thursday (thank you 4wd.com). When delivered the box was slightly opened at the corner, which exposed the end corner of the bumper with minor scuffing, but nothing a touch up of bedlinen can't fix. This was most likely due to UPS shipping and the weight of the bumper. Once opened, I was hesitant about the powder coat, but it is by far much superior to Barricade brand (friend has a similar mid front bumper by Barricade, which he had to have re-powder coated due to rusting within 2 months). I do have Smittybilt side rails also, 2 years, which are holding up perfectly from northeast winters. The bumper itself was easy install, hardest part was take OEM bumper off and accessing the bolts. Defiantly worth the purchase, especially for the price!
I went off-roading this past month and hit a tree pretty solid after sliding down a muddy hill. This bumper took the brutal impact and saved my jeep. If I was still running the stock bumper, my whole passenger side front end would have been wrecked. This a very durable bumper and I would highly recommend you replace your flimsy front stock bumper with this one.
This bumper took me around 20 minutes to install , this I a high quality bumper for the price , I even previously installed a smittybilt winch on factory bumper I had my son hold one side of the new bumper my wife on the other and I lifted the winch and it slid right on bolted back really easy I have recommended this bumper to friends and will continue to do so keep up with the great product Smittybilt
love the look! Love the durability of it..
Nice fit , down side is drill out bolt holes on jeep supports bigger then instructions say .
After talking with a sales rep I found all the parts I wanted with this including a winch. Very easy to install. I even did the winch plate and the winch. Please keep in mind when u get all of them at one time make sure u mount the winch to the plate then to the bumper. I had to take everything a part 2 times lol. Over all I had a good time installing this as it was my second biggest project on my jeep. Also just so u dont do what I did it doesn't come with d-rings.
Delivery was ridiculously fast.. Even over a holiday weekend. Installation was easy! To be honest, it took me longer to get it out of the box then actually installing on the jeep. Took the stock bumper off and put this one on in 30 minutes. Very Simple. Very Fast. I couldn't be happier. Bumper Looks great.
Great bumper at good price. One thing to note is that D-Ring mount will accept 3/4" only. 7/8 will not fit.
I bought this for my new 2014 JK Willys edition Wrangler along with the awesome new X2O Gen 2 Comp series 12,000 lb winch. This will be used for mild 4 wheeling in case a self recovery is required. I'll feel much safer knowing that I now have a very good chance at being able to get myself out of a jam off road. I like it so much, I bought 2 of them today, one for me and one for my buddy!
Is this bumper adequate to attach a tow bar to pull the Jeep behind a truck? What other parts do I need to tow the Jeep? Tow Bar, lights, adaptors?
Asked by Suzy from Wickenburg Arizona on
Suzy, Yes, the SRC Carbine Front Bumper is more than adequate for towing. May I suggest the JK Wrangler Towing PAK Part Number: 4WDJKTOWPK, it has everything that you will need in one complete package
Answered by Ken, ext4987 from Wickenburg Arizona on
will you be able to drive throw a brick wall
Asked by mike from mars on
Mike, the SRC Carbine Front Bumper is so durable that you would be able to drive through a brick wall, however I'm not sure how your steering set up and tires would like that, so we don't recommend it. Thanks for the question!
Answered by Sara H. Ext 4874 from mars on
Will this front bumper fit on my '97 TJ Sport?
Asked by Jake V. from United States on
Jake V, the Smittybilt SRC Front Grille Guard Bumper with D-ring Mounts will fit your Jeep. Thanks for the question!
Answered by Sara H. Ext 4874 from United States on
Smittybilt Recovery Tow Straps
Smittybilt D-Ring Shackles
Smittybilt Winch Plates
Smittybilt XRC GEN2 Recovery Winches
Daystar D-Ring Isolators
Pro Comp 7 Inch 100 Watt Driving Lights
For 60 years Smittybilt has been fabricating aftermarket parts and today their products include Jeep tops, bumpers, lighting, winches and trail gear. Off-roaders count on the company's innovative parts like the original nerf bar side steps to equip their Jeeps for the trail and day-to-day driving. Pairing affordability without compromising quality is the hallmark of Smittybilt and the manufacturer's reputation carries over to products like its Overlander Series of tents, Adventure Boxes and SEMA award-winning magnetic trail skins for Jeeps. Smittybilt offers over 2,000 interior and exterior parts and accessories for 4x4s with multiple capabilities for jeepers of all levels. Shop Smittybilt Now