Replace your old factory drag link with this chromoly one from Rubicon Express. Comes complete with new rod ends. Stronger than your factory and more complete then most factory replacements.
I bought this kit as a replacement for the Crown HD steering kit I had previously. I was rebuilding the front end, and the new axle had a larger diff cover the Crown was not clearing. I bought this kit in hopes of gaining some clearance. Not only did I gain the clearance, but the rod ends are beefier, the ti rod and drag link are beefier, and the entire kit feels like a whole different Jeep. The urathane bushing gets rid of the famed “dead spot” and just has a very smooth feeling. Straightening the wheel could not be easier either. It all just works. I wish I would have bought this the first go around!
we installed this under knuckle just like old one instead of over the knuckle because we did not have a reaming tool so far no problems some trouble with bump steer but i am planning on buying a drop pitman arm and just leaving the drag link as it is i am worried that if i do try to ream hole the taper wont be right and the tie rod end will wobble in hole
What size tapered reamer should be used for an over the knuckle installation?
Asked by dokon from on
Dokon, The Rubicon Express Chromoly Draglink requires the largest opening of the hole to be .730". Please let us know if you have any other questions. Thanks!
Answered by Tom S @ Ext 4876 from on
How many inches of suspension and/or body lift will this work for? I currently have no lift but I would like to go up to 2"-3" of suspension lift.
Asked by Michael from on
Hi Michael, This Rubicon Express Chromoly Draglink is a nice HD upgrade over the stock version, it will fit with suspension lifts to 4", plus it enables a custom Z-bend for Wranglers if you install a spring-over kit later. This kit works with body lifts also. Thanks for your inquiry.
Answered by Jim G Ext 4806 from on
Will this tie rod clamp fit with this Draglink? PSC Steering | Part Number: PSMPSC-TRCL09B 1.5 tie rod clamp
Asked by René from Netherlands on
Rene, Unfortunately the diameter of the Rubicon Express Chromoly Draglink is .875" so the PSC Steering clamp will not work. Please let us know if you have any other questions. Thanks!
Answered by Tom S. Ext. 4876 from Netherlands on
Rubicon Express has such a strong commitment to producing high quality Jeep suspension systems that it offers a lifetime, transferable hassle free warranty on all its products. It is a true lifetime warranty that can be used by the original owner of the tenth owner of the Jeep. The warranty covers all components, even down to the Super-Ride bushings. Rubicon In addition, Rubicon Express offers a wide variety of builder parts for customizing a build. All builder parts use the highest quality materials, components and manufacturing processes, insuring the built out rig will perform at the highest level possible. Rubicon Express has anything the builder needs from axle bracket kits to HD superflex joints, super-ride bushing kits to control arm brackets and much more. Shop Rubicon Express Now