Up To $500 Off Tires and Wheels | Shop Now
The 2.5" Standard System is a great entry-level setup and includes our twin-tube shocks. Its a complete suspension system that provides a modest 2.5" of lift that greatly improves upon the Jeeps stock appearance and says to onlookers that your Jeep has off-road credibility,
I love this lift. It was an incredible upgrade for my 89 Wrangler with the sagging worn out original springs. As others have suggested get the relocation brackets for the rear shocks and I also recommend stainless steel front lines as well. My Jeep looks amazing now on the BFG 31s and I couldn't be happier. The ride is really smooth, but is still stiff because, well it is a YJ.
Hardest part of the install was getting my old rusted parts off. I'm running their 5" grease-able shackles as well and got about 3.25" lift all around. Couldn't be happier. Only disappointment was the paint job done on the leaf springs. Some parts hadn't even been covered, nothing a little spray paint couldn't cover. Once you place the order, email RE and get the rear shock relocation bracket. No sense messing around with flipped shocks. Definitely would purchase again.
The Rubicon Express 2.5" Suspension #RE2005 has been on my 1991 Jeep YJ for over 2.5 years and all is great. I have since removed the transfer case lowering kit and installed a SYE along with a front driveshaft from a Jeep XJ that has been shortened to use in the rear of the YJ with the SYE. The suspension hasn't settled anymore but does flex a lot more. I am still running 265/75R16 BF-Goodrich All-Terrains and with the front sway-bar disconnected the front tires will rub the fender under full compression. (with the sway bar connected there is plenty of clearance for the 32's) I'm planning to either fab up some bump-stop relocation brackets for the front or downsize to a 245/75R16 tire. Another option is to run a highline front fender. The rear is still good though I did use a heat gun many years ago to reshape the front edge of the rear factory flares to allow clearance for the 30x9.50R15 BFG Mud-Terrains at stock height. I am very happy with this suspension.
The Rubicon Express 2.5" Standard Suspension System #RE5505 is a fairly complete kit but if you plan on using the supplied twin-tube rear shocks on your YJ's stock rear axle, you can expect contact between the shock tube and the axle tube when installed according to directions. Most people I have spoke with have had this issue and chose to install the shocks upside down to resolve it. I spoke with Rubicon Express and they said not to run the shocks upside down and sent me shock relocation brackets #RE2007 to resolve this issue. The install was fairly easy and takes one person 8 to 10 hours of actual work depending on weather, tools available, and location (garage/shop, driveway, dirt). This lift gives you around 3.5" of lift and after towing heavy trailers, offroad use, and daily driving, the lift has only settled about 1/4". The ride was stiff for the first couple hundred miles but now is very smooth on & offroad. There is an installation video on YouTube that will help an inexperienced installer.
Is there any other hardware I will need to make my Jeep function safely and properly? For example will I need the extended brake line kit?
Asked by Atom Bomb from Knoxville TN on
Atom Bomb, the Rubicon Express 2.5 Inch Standard Leaf Spring Lift Kit with Twin Tube Shocks comes complete with everything you will need to lift the Jeep and drive it safely. I hope this helps!
Answered by Sara H. Ext 4874 from Knoxville TN on
Rubicon Express has such a strong commitment to producing high quality Jeep suspension systems that it offers a lifetime, transferable hassle free warranty on all its products. It is a true lifetime warranty that can be used by the original owner of the tenth owner of the Jeep. The warranty covers all components, even down to the Super-Ride bushings. Rubicon In addition, Rubicon Express offers a wide variety of builder parts for customizing a build. All builder parts use the highest quality materials, components and manufacturing processes, insuring the built out rig will perform at the highest level possible. Rubicon Express has anything the builder needs from axle bracket kits to HD superflex joints, super-ride bushing kits to control arm brackets and much more. Shop Rubicon Express Now