Up To 20% Off For A Limited Time | Shop Now
RockJock now offers Antirock sway bar kits in a universal form for those building their own custom rigs and rock buggys. This universal kit features a 50" torsion bar length and 21" long steel arms as used in our 2-door JK rear applications. Vertical links use a 14" long 1/2" x .20 RH/LH threaded rod that can be cut down to your desired length, and the necessary 1/2" x 20 thread heim joint rod ends, jam nuts, and tabs to weld to your axle tube are supplied. Also supplied is the universal weld-in 1.75" x .095 wall DOM tube that is cut to the proper length to work with the torsion bar length, and the Delron bushings to support the bar in the tube. The 50" bar is a .900" diameter. These kits require fabricating for installation -- these are NOT bolt-on kits.