The DOT/SAE Certified Lights -allows for a very wide, smooth beam with minimal beam height. This allows us to offer DOT(FMVSS 108) compliant LED lights for front fog lamps and auxiliary high beam. By complying with the Federal requirements, Rigid Industries LED light can now be used legally on a federal highway! Front Fog Lamp comes as a set in our ultra popular Dually housing. Using our new SAE optical system we provide a SAE J583 compliant beam that is 4 degree x 45 degree pattern for the ultimate fog light. Now you can replace those worthless factory fog?s using one of our OE fog light kits and have LED lights that you can leave on! To be FMVSS108 Compliant, Rigid Industries LED Lights passed certain SAE standards, test procedures and material test; set to guide the quality of the product. With its unbreakable polycarbonate lens, durable UV-resistant powder-coat and patented optics, the SAE Certified Light Series Lights by Rigid Industries are the total lighting solution. The accomplishment of Rigid Industries to receive the SAE Certification displays Rigid Industries dedication to providing a total vehicle lighting solution, ON OR OFF THE ROAD!
I installed these in my factory foglight holes on my 2012 F150 4x4. I previously had aftermarket 35w HID bulbs in the factory housings. The light was bright, but the pattern was bad. Oncomming traffic was constantly flashing me. These Rigid lights have a perfect fog pattern. Low and wide with a sharp cut-off.
Using the factory bumper in a Jeep JK Wrangler, do you need to buy the: Fog Light Kit Rigid Industries | Part Number: RIG40138 to install the lights in the factory fog light location?
Asked by RedBeard from on
Hi RedBeard, This Rigid Industries DOT/SAE Fog Light Kit fits great on the stock JK bumper, you'll need the conversion kit to accept these squared style lights into your fog light opening. Thanks for your inquiry.http://www.4wd.com/Jeep-Lighting-Jeep-Lighting-Accessories/Fog-Light-Kit.aspx?t_c=14&t_s=448&t_pt=9886&t_pn=RIG40138
Answered by Jim G Ext 4806 from on
Are the fog lights sold in pairs or individually?
Asked by ONLY1JP from Bismarck, ND on
Hi ONLY1JP, This Rigid Industries DOT/SAE Fog Light Kit is in kit form, includes 2 lamps, all the wiring, switch, mounting brackets and hardware. Thanks for your inquiry.
Answered by Jim G Ext 4806 from Bismarck, ND on
Is this "plug and play" for a 2014 Jeep Wrangler Unlimited with the existing factory fog light wiring? If not, will this require a separate switch to power on/off.
Asked by DUNESDAYJK from Fleming Island, FL on
Dunesday JK, the Rigid Industries DOT/SAE Fog Light Kit will wire in all you have to do is splice the connectors in. Hope this helps!
Answered by Zach O. ext 4939 from Fleming Island, FL on
Rigid Industries started in the garage of the CEO Jason Christiansen. That was back in 2010 and now the company has over 200 employees. Rigid Industries has an in-house customer service department, an in house warranty department and all their products are developed and fabricated in-house. Rigid Industries strives to be an innovator in forward projection lighting. The company pushes the envelope on new technologies when focusing on serving its off-road clients or its government clients like military and fire and rescue or its boating and fishing clients. Along with innovation Rigid Industries focuses on quality. The company spends a lot of time on quality control. They test the products thoroughly so you can go out into the dark with peace of mind. Shop Rigid Industries Now