Polyurethane track arm bushings are engineered to prevent the entire front or rear end from switching left to right unannounced, greatly improving steering feel and response.
I started to develop the dreaded death wobble on my 05 TJ Sport. Seen play in the stock rubber bushing in the track bar. It was harder to get the old rubber bushing out than it was to install the new bushing. The bushing comes in two pieces. The front bushing fit much tighter than the back. I used a Die grinder to put a small chamfer on the leading edge. I put a little Anti-seize and a long bolt and two large washers to squeeze it in the track bar. Worked great!! No issues so far.
Quality Products @ Fair prices
What is the inner diameter of the sleeve in lower track bar bushing? What size bolt will fit with little play?
Asked by Natedogg from Dexter MO on
Hello Natedogg, The sleeve in the Prothane Motion Control Track Arm Bushing Kit is an 3/4 x 1.595. You should be able to use a 3/4 in bolt.
Answered by Matt C EXT 831 from Dexter MO on
Costa Mesa, California-based Prothane Motion Control was launched in 1991 and the company manufactures quality performance urethane based products. Unique formulations, exacting engineering and a customer focus make Prothane Motion Control a popular brand in urethane based components. When you're looking for a bushing kit, drivetrain kit, motor mount or more, we carry a wide variety for different Jeep makes and models. Off-roaders recognize the signature red and gold colors of PMC components that hold up under trail conditions and won't deteriorate or rot from oils, chemicals and atmospheric contaminates. Shop Prothane Motion Control Now