Polyurethane is designed to last. It doesn't rot or deteriorate from oils, road salt, chemicals or atmospheric contaminates such as ozone or smog. That means our bushings will not deteriorate and cause mushy, uncertain responses when driving. Our components make a drastic improvement in the way your vehicle handles.
Good product but it is a tight fit to get started in the frame hole. Once it is started they go in just fine. I found that if I put a slight bevel to the nose end of the bushing it was much easier to get it started. It didn't take much of a bevel, about 1/64 or 1/32 of an inch. Basically just make it so it is not such a sharp square corner.
I have a 66 CJ5 and these bushing fit the stock spring hangers. I don't know what more I could write.
What is the dia
Asked by Ken from Nj on
Ken, the skinny part of Prothane Motion Control Polyurethane Spring Mount Upper Shackle Bushing is 1 1/4" and the cap is 1 3/4". They also measure 1.5" tall.
Answered by Jason L from Nj on
Does this item come with the bushing spacer?
Asked by Racquel from on
Racquel the bushing spacer is included in the Prothane Motion Control Polyurethane Spring Mount Upper Shackle Bushings.
Answered by Jason L from on
Costa Mesa, California-based Prothane Motion Control was launched in 1991 and the company manufactures quality performance urethane based products. Unique formulations, exacting engineering and a customer focus make Prothane Motion Control a popular brand in urethane based components. When you're looking for a bushing kit, drivetrain kit, motor mount or more, we carry a wide variety for different Jeep makes and models. Off-roaders recognize the signature red and gold colors of PMC components that hold up under trail conditions and won't deteriorate or rot from oils, chemicals and atmospheric contaminates. Shop Prothane Motion Control Now