Polyurethane is designed to last. It doesn't rot or deteriorate from oils, road salt, chemicals or atmospheric contaminates such as ozone or smog. That means our bushings will not deteriorate and cause mushy, uncertain responses when driving. Our components make a drastic improvement in the way your vehicle handles.
Good product but it is a tight fit to get started in the frame hole. Once it is started they go in just fine. I found that if I put a slight bevel to the nose end of the bushing it was much easier to get it started. It didn't take much of a bevel, about 1/64 or 1/32 of an inch. Basically just make it so it is not such a sharp square corner.
I have a 66 CJ5 and these bushing fit the stock spring hangers. I don't know what more I could write.
What is the dia
Asked by Ken from Nj on
Ken, the skinny part of Prothane Motion Control Polyurethane Spring Mount Upper Shackle Bushing is 1 1/4" and the cap is 1 3/4". They also measure 1.5" tall.
Answered by Jason L from Nj on
Does this item come with the bushing spacer?
Asked by Racquel from on
Racquel the bushing spacer is included in the Prothane Motion Control Polyurethane Spring Mount Upper Shackle Bushings.
Answered by Jason L from on