Pro Comp is the fastest, safest, least expensive way to bring the front of your Vehicle level with the rear. This gives you the clearance and ability to add wheels and tires up to 35 inch in dia. Pro Comp products do not affect the factory OEM ride quality or comfort. Thats why Pro Comp also offers a lifetime warranty for as long as you own your vehicle against defects for all of our products.
Added to my wifes Armada after seeing you cant tell much difference beside a 2wd. Added BFG A/T after level and looks much better. Thinking 6" may be on the way down the road.
Very very poor design. I tried in every way to get this unit installed on my truck without cutting or drilling. The studs on the unit do not line up with the strut housing on my truck. The studs on the unit are clearly spread out too wide to fit into the housing. Thinking it was a defective unit, I took it back to 4 wheel parts and they pulled out another brand new unit to compare it to my stock strut. Unfortunately, it was the same result. Fortunately, the guys at 4 wheel parts were very understanding and provided good customer service and refunded me for the purchase. Unless you're into grinding, bending and drilling to make a part fit, I wouldn't wast my money.
Yup. It's now level
Could I use Torsion key lift with the coil spacers and shocks for a 4" lift up front and a 2 1/2" add a leaf in the rear and or just a 3" tapered block in the rear and heck the same length shocks as the front.
Asked by BEAR from Eastern Shore Maryland on
Hello Bear If you have coils springs you won't have torsion bars and vice versa. It is one or the other suspension not both. Thanks
Answered by Rody from Eastern Shore Maryland on
After 4WP installs the 3" Level Lift, Will I have to change the upper control arm? Does the arm or the strut spring have any contact issues? What about ball joints and angles? 2006 Toyota Sequoia 2wd.
Asked by Parker from Oceanside, ca on
Hello Parker, We recommend that you do change upper control arms when install the Pro Comp Suspension 3 Inch Level Lift Strut Spacer on your vehicle. Thank you.
Answered by from Oceanside, ca on
I have a 2000 chevy c2500 with struts in the front. I have looked everywhere for something too level out the darn truck just can find anything. Would this work for my front end? If not could you refer me to another one of your products that would?
Asked by uneven C2500 from Daytona Beach, Fl on
Hello uneven, This part number will not work with your vehicle. We do however offer the Daystar ComfortRide 2.5 Inch Front Leveling Kit Part Number: DAYKG09101BK for your vehicle.
Answered by from Daytona Beach, Fl on
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now