The Pro Runner Monotube shocks deliver the most “bang for your buck” when combined with the new Pro Runner Control Arms. At the heart of the shock is the gas-charged monotube design that delivers superior performance compared to traditional twin tube shocks. The brushed and zinc-plated, clear coated monotube body is nitrogen gas pressurized to eliminate performance-robbing cavitation during compression and rebound. This allows the shock to dissipate heat more efficiently. The Vehicle Specific Ride Tuning (VSRT) in each shock was derived using extensive dyno and real world testing. The result is multi-stage valving to optimize the ride and handling characteristics for each application. Whether you are towing a trailer or hitting woops in the desert, you can count on Pro Comp Pro Runner monotubes to give you the confidence behind the wheel.
Purchased these at my local store on FM1960 in Houston to replace the shocks provided with a suspension lift. The ride is so much better. These are supposed to be made by the same company who manufactures the Bilstein 5100 series shock. Great deal on a great shock. Couldn't be happier with the ride now that these are on the truck.
I have a jk with a skyjacker 2.5 lift kit and added a 3 in spacer in the front to level it out so the shocks were all extended making my ride very hard, i got the procomps pre run for 4-6 inch lift now i have more play and smoother ride.
2005 Ram 1500 4x4. Replaced my wearing-out factory shocks with these. Ride is a little sharper on the road but not enough to be an annoyance. I went on the same Colorado trail with these new shocks that I did with the old ones two years ago. What an amazing difference! The factory shocks bounced us around like a bounce house. The Pro comps took everything in stride--it absorbed bumps large and small without the bounce. I would recommend these to those that will actually use them now and then off-road. Sorry to hear the previous reviewer had issues wiht them. Ride comfort is a very subjective thing.
I have a 2014 ford f150 2wd with 3 inch blocks on the rear, will these shocks work? Thanks Michael
Asked by blando from austin texas on
Hello blando, Sorry, this hsock will not fit the rear of your vehicle. We do offer Part Number: EXP929504 that will fit. Thank you for the question.
Answered by from austin texas on
2005 ford f150 fx4 6 inch lift, Rear shock part# ? also what is the diameter of shock body? I need a shock to replace my MR 6 with smaller diameter to clear traction bars, pro runner? or ES series?
Asked by gary from north hollywood on
Hello Gary, This shock is a 2.0 diameter. Pro Comp does not offer a rear Pro Runner shock that fits your application at this time. They do offer the ES9000 Part Number: EXP929504, MX-6 Part Number: EXPMX6009 and MX-6R Part Number: EXPMX6068R for your vehicle. Thank you for the question.
Answered by from north hollywood on
Will this work with a 4 inch lift on a 2013 Dodge Ram 1500 4wd?
Asked by Steve from on
Hello Steve, Yes, the Pro Comp Suspension Pro Runner Series Shock Absorber EXPZX2001 will fit the rear of your vehicle application. Thank you.
Answered by from on
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now