Pro Comp Nitro Kits are the economical alternative to a complete suspension system. The Nitro Kits utilize coil spring spacers, torsion keys, and strut spacers to achieve front lift. This leaves the factory steering geometry intact, preserving factory ride quality and handling. The rear lift is achieved through coil spring spacers, leaf spring shackles or lift blocks. If you want to add larger aftermarket wheels and tires to your rig without installing a complete suspension lift kit, Pro Comps Nitro Kits were designed with you specifically in mind.
2012 F-250 crew Cab Diesel. I was strapped for time and the option of installing the leveling kit myself. I took the route of ordering from 4WD parts and having their mechanic team install the lift. They were very detailed from beginning to end with the whole process. When I got the truck back, I was very pleased with the work they did and the look. I had a hundred mile trip ahead of me and was happy with the ride quality and the way the truck handled. I've had this level lift for awhile and have no issues to complain about. 4WD Parts even followed up a week later to see how the truck was handling and acting. I'd recommend these guys to anyone modifying their suspension or truck.
First off 4 wheel parts is awesome in my opinion. I ordered this kit on Sunday afternoon and it was on my porch on Tuesday after work. It was all I could do to wait until the weekend. I Installed the Pro Comp Nitro 3.5 inch level lift on my 2013 Ford F-250 Super Duty XLT Crew Cab Short bed. A good Friend and I completed the kit in 6 hours. Not being a professional mechanic my opinion is the kit is very comprehensive and high quality. I wish I would have been able to read this. You will need deep well metric sockets bigger than you get in your average kit. In addition having access to spring compressors, a high quality floor jack, jack stands, impact, a high value torque wrench, and a cheater bar is key. If you don't have these or have a buddy with them spend the cash to get it installed. One bolt requires 400 ft/lbs of torque my wrench only goes to 150 so we used the cheater bar and tightened to very very tight. Second, the directions I am sure are fine for a professional mechanic but for the average guy that doesn't wrench often they are less than descriptive. For example, they say to disassemble the brake brackets and replace with the new ones. We struggled with this for a good 20 minutes until it became obvious. Some common sense and intuition goes a long way in understanding the directions. Also, the order seemed off we replaced all the parts on the driver side when the spring was out for ease rather than follow the order they gave. The Kit also included a carrier barring spacer for a long bed. Having a short bed that had us scratching our heads for a minute or two. The inner wheel wheel brackets instructions made zero sense we threw those back in the box. maybe ill figure them our later. In summary, I am thirty year old guy that wanted to run proper sized tires for getting around in these rocky mountains but also needs to get to the jobsite 5 days a week on asphalt. My short summary is My truck look sick, I cant wait to get my tires, make sure you can get or have proper tools, read the directions completely and be willing to skip ahead when it make common sense. Make sure you have a friend to help or be willing to spend two days installing this kit yourself. Last note. My truck seems to ride better with this kit.. Not something I was expecting. Thanks for Pro Comp for a high quality and complete kit and to 4 wheel parts for amazing shipping.
This is a good kit won't break bank rides good and you can roll 37s on factory 20s on f250/350
Can I run a 305-55-R20 tire on my 2015 Ford F150 4x4 Sport with this kit.
Asked by Snooker from Fl on
Thanks for the inquiry Snooker, the Pro Comp Suspension 3 Inch Front Lift With Rear Blocks part # EXP62206K those will fit no problem.
Answered by from Fl on
HOW MUCH WILL THIS RAISE THE FRONT END HOW MUCH WILL THIS RAISE THE BACK ENED?
Asked by MICHAEL from WILLIS TEXAS on
Hello Michael, Technical Details: Lift Height: 2.5 Inch front, 1 Inch rear.
Answered by RK from WILLIS TEXAS on
I have platinum fx4 with a 3.5 will the 62206k kit work if so will it set hight in the back
Asked by Roy from Arlington tx on
Thanks for the inquiry Roy, the Pro Comp Suspension 3 Inch Front Lift With Rear Blocks part # EXP62206K with this lift the truck will sit level.
Answered by from Arlington tx on
Smittybilt High Performance Air Compressors
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now