Pro Comp Nitro Kits are the economical alternative to a complete suspension system. The Nitro Kits utilize coil spring spacers, torsion keys, and strut spacers to achieve front lift. This leaves the factory steering geometry intact, preserving factory ride quality and handling. The rear lift is achieved through coil spring spacers, leaf spring shackles or lift blocks. If you want to add larger aftermarket wheels and tires to your rig without installing a complete suspension lift kit, Pro Comps Nitro Kits were designed with you specifically in mind.
Ride is very good, used stock Toyota Tundra blistein shocks (only 3000 miles on them) only put toyo open country 275/70/18 AT's on it. The stance is much better than stock, look is far better than stock - put a level on it in several spots (it is level) not real aggresive looking - just better with out any sacrifice. Guys at 4wheel parts Santa Ana did a very good and quick install.
the installation of this kit was fairly easy outside of replacing lca due to seized cam bolts. the front gave 2.5 inches as stated but the rear barely gave 1" so prevous to lift i had 1 " rake (higher in rear) after lift 1/2" rake (higher in front) I will have to install blocks or aal.
My initial rating is 4 stars. Once I install larger tires I will update this review accordingly. To start, the truck looks great!!! No more droop in the front. I will be towing a 20 foot boat soon so I will then see how the rear holds up to a load. As far as ride quality goes, I do not see much difference from before the install. The truck does feel more solid and the ride a tad bit stiffer, which I like.
Hi, I have an 05' escalade with autoride, will this work properly? I have found mixed information on lifting with the autoride system, and want to make sure it will work. Thanks
Asked by Vince from NJ on
Hello Vince The Autoride system has computer controlled shock dampening and rear auto leveling. I do not recommend lifting the Escalade because of the Autoride system and because of the AWD. The Escalades are All Wheel Drive and lifting it will cause driveline and drive axle vibration. Thank You for your question. Jon Snyder 4Wheelparts
Answered by from NJ on
wich blisten shocks are recommended to be added to this kit?
Asked by enrique from mexico on
Hello Enrique, You will need part number Part Number: S/DShockingBIL5100w/FRTStrut. this will get you the two front struts and two rear shocks needed. Thank you for the question.
Answered by RK from mexico on
Hi, I am interested in purchasing this lift kit and was just wondering how much you guys would charge for installation?
Asked by Erdub54 from San Diego, Ca on
Thanks for the inquiry Erdub54, the Pro Comp Suspension Nitro 3 Inch Lift Kit part # EXP65205K our stores charge $320.00 for installation.
Answered by from San Diego, Ca on
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now