The ES1000 performance series shock is designed to replace the factory shock and provides optimum performance, enhancing driving comfort and vehicle control. Utilizing a 1 3/ 8 in. nylon banded full displacement piston head and double welded shock mounts, this shock assures strength and long lasting durability.
They compliment my .5" rear springs on my 5th generation 4runner nicely.
Recieved my shocks the day after placing the order. It has been a week & they all are still not installed on my 1980 CJ7. They come with roll pins inserted into the bushings that will not fit over the Jeep shock mounts (of course this is not shown in any of the stock photos or desctriptions of the shock). They also come with hardware that includes alternate size roll pins (none of which fit by the way) but leads you to believe that switching these out is an option. Who really knows though becasue there are no installation instructions included. I hade to use a vice & sockets to remove the roll pin sleeves. Once out the holes in the bushings closed up so tight I had to use a big C-clamp to force the shock onto the mount. This caused the bushing to shift slightly in the eyelet on the shock. After much forcing & prying I finally got one shock installed & the buhsing seated properly. What should have been a 15 minute job has turned into hours. I will never purchase a pro-comp shock again. I should have sent these back as soon as I saw the roll pins.
this product fits to my land cruiser fj40 1981? (engine 2f)
Asked by Alejandro from Venezuela on
Hello Alejandro, These Pro Comp Es1000 will work with the fj40. If you have anymore questions feel free to ask, Thank you.
Answered by [email protected]tension4833 from Venezuela on
Will the pro comp es 1000 shock work with a 1 1/2 inch lift on a 1996 cherokee?
Asked by Lancer from on
Hello, yes this is the front shock for the 96 XJ Cherokee with up to a 1.5" inch lift kit on it.
Answered by Bob H from on
bought a used cherokee with lift. how can i find out how high lift is?
Asked by muffnman from plainwell, mi on
muffnman,if you bought a lifted vehicle and you want to replace the shocks with some ProComp Suspension ES1000 Series Shocks, the best thing to do is remove one of the shocks and measure to see exactly what you need.
Answered by Jason L from plainwell, mi on
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now