Constructed with 1/4 inch plate steel, these bumpers are designed for high departure and approach angles. The 1/4 inch plate steel helps slide your Jeep over boulders, rocks and stumps.
Bought to replace a bent bumper. Easy to install, looks good, seems durable.
This bumper will rust out over time (couple of years). I am going to need to refinish it, since the warranty does not cover rust. It would be a great bumper with a better finish.
painted ready to install,from the box to the jeep 10 minutes.
I think this bumper is nice except for one tiny problem. On a 2004 Jeep Wrangler, the top lip does not reach back as far as the stock bumper, thus leaving an inch+ gap between the frame cover and bumper. It seems that with a little less angle on the bottom of the bumper or an extension of the top plate of the bumper, both torx bolts could be utilized to mount the bumper (this would also eliminate the gape between the bumper and stock frame cover). Other than my minor dislike, I really like this bumper b/c it is simple, low-profile, and can be customized anyway you want it.
Item description states "Drilling required on 1997 to 2000 TJ" What kind of drilling & where? What needs to be drilled, the TJ or bumper?
Asked by Cha from on
Hi Cha, This Pro Comp Suspension Jeep Crawler Front Bumper in Black powder Coat is generally a no drill install, however on some of the Jeep TJ's from '97 to '00 models the holes in the bottom of the frame may not already be there. You won't need to make any holes in this new bumper, only in the Jeep itself if they are not there. Great question, thanks for your inquiry.
Answered by Jim G Ext 4806 from on
The front bumper is 46 inches? And the rear is 54? just clarifying from a previous question.
Asked by Papa from Tri Cities Washington on
Papa, The total width of this bumper is 54" and the front where it tapers in is 46". Please let us know if you have any other questions. Thanks!
Answered by Tom S. Ext. 4876 from Tri Cities Washington on
What is the L x W x H of this product?
Asked by Tavo from on
Tavo, the Pro Comp Suspension Jeep Crawler Front Bumper in Black powder Coat is 54x7x7 and weighs 31 pounds. I hope this helps!
Answered by Sara H. Ext 4874 from on
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now