Up To 20% Off While Supplies Last | Shop Now
These NEW Boxed Lower Control Arms increase weld area around the bushing eyelet for improved strength. There are now specific front and rear arms that can be mounted traditionally with the bend down or upside down for improved break-over angles. The front arms are formed to eliminate tire scrub at steering lock.
i have an 03 wrangler with a six inch lift will these fit and if not what other options do i have?
Asked by lewie from roanoke va on
Lewie, the Pro Comp Suspension Boxed Rear Lower Control Arms won't work with your application. You will be better off with an adjustable control arm. I'm assuming that you have a long arm with that height level, so your arms should already be adjustable. Here is a list of our adjustable control arms: http://www.4wd.com/eSearch.aspx?N=16va5&Ntk=primary&Ntt=adjustable+control+arm
Answered by Sara H. Ext 4874 from roanoke va on
I have a 2004 wrangler x with a 4 inch lift. Will these work with the lift or not?
Asked by matt from NW pa on
Yes, you should have no problem installing these Pro Comp Boxed Rear Lower Control Arms on your Jeep with a 4 inch lift. Thanks!
Answered by Craig R. from NW pa on
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now