The most vulnerable areas on the body of the Jeep JK are the rocker panels. Poison Spyder Rocker Knockers protect your JKs rocker panel area while enabling you to slide over rocks and obstacles. Rocker Knockers enhance your Jeeps trail performance while adding rugged off-road looks to your JK. These Frame-Mounted Rocker Knockers are identical to our Body-Mounted version, except in how they mount. Which one is best for you will depend on how you intend to use your Jeep! The tubular rocker rail is rugged 1.75" X .120 wall DOM structural tubing. The slider rail is fabricated from CNC-bent 1.5" X .120 wall DOM tubing. The space between the Slider and the main tube of the Rocker Knocker is filled with a 3/16" thick CNC laser-cut steel base plate for the removable slider skid. The slider and skid mount at an angle to the main tube of the Rocker Knocker to provide boatside-like protection from the rocks while keeping the Jeeps doors and body a safe distance from higher level trail hazards. The removable slider skid features Poison Spyders exclusive oval dimples for structural strength as well as great Poison Spyder looks. The Skid attaches with countersunk stainless steel flat head cap screws for a flush surface. The outer skid is made of 1/8" steel and is secured to a 3/16" base plate welded into the slider hoop assembly. The Slider does not rely on the skid for structure. The advantage of having the ability to remove the skid, is to allow you to replace it if it becomes damaged to a level that it has lost its aesthetic appearance or functionality. Also you will be able to customize the Sliders color to match your Jeeps body color, or any color you choose. Frame-Mounted Rocker Knockers attach to your Jeeps frame rails through three rugged, precision engineered outriggers on each side. The outriggers are fabricated of CNC laser cut 3/16" thick plate steel, and are designed in a triangular shape to act as their own gusset and provide superior strength. The outrigger wraps around the bottom and side of the frame rail for support on two planes. The outriggers are also located so they may be directly bolted to the sides of the Jeeps body mounts for even more strength. Compare this design to competitors' frame-mounted sliders that use a simple piece of non-triangulated, non-gusseted tubing welded to a plate that attaches to the side of the Jeeps frame rail. Instructions and hardware are provided for a fairly easy bolt-on installation of the Frame-Mounted Rocker Knockers. The procedure uses some existing mounting holes on your Jeeps frame, but does require some additional drilling and tapping. We provide the necessary tap to thread the additional holes (tap-handle not included). Alternatively, installers may choose to weld the Rocker Knockers in place. Please note, however, that reaching the nuts on the back-side of the slider plate for installation of the removable skid will be more difficult with the Rocker Knockers already in place. We recommend testing the skid removal process with the Rocker Knockers bolted into place, before permanently welding them on.
Are these bolt on or is drilling required and do they need to be powder coated? Thanks
Asked by jeepman from Riverton ut on
Hi Jeepman, These Poison Spyder Customs Frame-Mounted Rocker Knockers can be bolted on or welded, and drilling new holes will be required if you bolt them on. We recommend a paint or powder coat finish since they are bare steel. Thanks for your inquiry.
Answered by Jim G Ext 4806 from Riverton ut on
Are the Poison Spyder Rocker Knocks $605.99 each or for the pair? thanks for your assistance with this product.
Asked by Dave from Houston, TX on
Hello Dave, The Poison Spyder Custom Frame-Mounted JK Rocker Knockers are sold as a pair.
Answered by Matt C EXT 831 from Houston, TX on
Poison Spyder Customs has a heritage in hardcore off-road accessories that started when founder Larry McRae was little. McrRae's daddy use to load him up in the Ford Bronco to explore the off-road trails of the southwest. McRae became a professional rock crawler who raced for Nelson & Nelson Racing in the early 2000s. McRae purchased PSC from the Slay family and kept the vision of developing and fabricating high end quality off-road accessories right in the Pomona, California headquarters . McCrae and his wife are members of the Inland Empire 4 Wheel Drive club. McCrae himself is a Past President and Mrs. McCrae is a past Treasurer. Every product produced by PSC starts as a prototype tested on real trails by members of the club. Shop Poison Spyder Customs Now
We Pay the Sales Tax on All Poison Spyder Products