Poison Spyder Customs BFH front bumper is designed for those hardcore four-wheelers who value strength, simplicity and function. This bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible. It is no wider than the Jeeps frame rails, with angled facets to improve its ability to slide over the rocks. The BFH bumper is CNC laser-cut from a single piece of high strength 3/16" plate steel, then precision brake-formed for an exact fit. The BFH bumper features an integrated winch mount and one-piece design. The Brawler Bar is a lower-profile Stinger, fashioned after the 2-bend Stinger featured on our Original RockBrawler bumper for JK. The Brawler Bar features the most versatile combination of trail protection and a lower profile for easier access to the engine compartment, fitment into garages and trailers, etc. Plus it looks bad-ass! The Brawler Bar extends 7.4" forward from the front edge of the bumper, and 9.8" high from the top surface of the bumper. The Recovery Shackle Tabs are machined from 1" thick plate steel to provide a secure attachment point for 3/4" recovery shackles. These tabs are specifically engineered to match the angles of the BFH bumper to result in zero loss in approach angle. The RockBrawler Rear Bumpers high clearance, multi-faceted design provides the best possible departure angles and corner obstacle clearance. Its appearance is streamlined and sexy, not like the squarish, boxy shape of many other bumpers on the market. The RockBrawler is constructed of CNC laser cut, brake-formed 3/16" plate steel. The RockBrawler Rear Bumper can be mounted without cutting or altering the Jeeps frame rails. The RockBrawler spare tire carrier is built from the highest quality components. The main structure of the tire carrier is fabricated from NC-bent DOM tubing and laser-cut, precision brake-formed plate steel. The extreme duty hinge assembly includes a CNC machined spindle and housing, with a pair of Timken tapered roller bearings for smooth operation under the heaviest loads. The latch is a high quality automotive grade mechanism, concealed in a fabricated housing. There is a spring-loaded pin-lock with stainless steel slider plate that locks the tire carrier into the open position to keep it from swinging around while accessing the Jeeps tailgate. The latch and pin lock are both easily disengaged with a simple pull of a knob. The tire mount is adjustable up and down, as well as in and out, to accommodate a wide variety of tire sizes up to 40". The adjustability allows the tire to be mounted as low as possible for any tire size, to keep a low center of gravity. The included license plate mount places the license plate at the center of the spare tire. IMPORTANT: Tire carrier will NOT fit with stock Jeep wheels, AEV wheels, or any wheel with a center hole of smaller than 2" and/or more than 4-1/2" of backspacing. Tire carrier does fit with most aftermarket wheels, please measure yours for compatibility before ordering. The RockBrawler Rear Bumper features an integrated receiver hitch. The hitch is tucked high up into the bumper to provide better obstacle clearance and departure angle than OE or aftermarket hitches. IMPORTANT: The integrated hitch receiver is not rated for towing. It is intended as a recovery attachment point only. The Heavy-Duty Recovery Shackle Tabs are CNC machined from 1" thick steel billet, specifically designed to accept our heavy duty 3/4" Recovery Shackles. These tabs are designed to match the high clearance aspects of the rest of the bumper and minimized hang-ups. Selecting this option will get you a pair of these tabs, expertly welded to the RockBrawler Rear Bumper. The universal mounting system for the RockBrawler rear bumper comes with captured hardware already in place for installation on to either TJ/LJ, YJ, or CJ. Simply pop out the bolts that will be unused for your application, and bolt it on! The RockBrawler Rear Bumper comes with Grade 8 mounting hardware. The bumper ships as bare steel, ready for you to paint or powder coat in your color of choice.
Manufacturing products exclusively for Jeeps, Genuine Packages carries front bumpers, suspension systems, LED light bars, receiver hitches and more. Upgrade your Jeep's bumpers with front and rear ones from Genuine Packages that are compatible with 2 and 4-door models. When you're looking for part replacements to get trail-ready for anything you encounter, products from Genuine Packages fit the bill. We carry a full lineup of interior and exterior items. Forget overpriced parts and accessories for Jeeps and go with products produced by Genuine Packages. Shop Genuine Packages Now
We Pay Your Sales Tax