how do I install this seal? it is a 1994 jeep wrangler yj, it has new windshield and all seal around it are new. I am still getting water coming in behind the dash. the seal at bottom of cowl was not replaced and is in rough shape,so I thjink this is where the water is coming in at.
Asked by normo from east texas on
Normo, in order to install this Omix-Ada Cowl Seal you will have to remove the windshield hinges from inside the cab of the jeep and tilt down the windshield frame. There should be a few screws holding on the current one in place, unscrew and remove the old seal. Then just attach the new seal ( you may want to add a bead of clear silicone). I would also say take the seal out of the package and let it lay flat for a day.
Answered by Jason L from east texas on
does the lip go up or down
Asked by gm from tn on
GM, every time I have installed one of these cowl seals I put the lip up.
Answered by Jason L from tn on
what kind of adhesive is needed
Asked by bob customer# 5800397 from palm beach gardens florida on
Installation of this Omix-Ada Cowl Seal does not require any adhesive or sealant. Thanks!
Answered by Craig R. from palm beach gardens florida on
How do you get to work? At Omix-ADA we take the road less traveled. With an in-house engineering department the company continuously develops and tests new products. At Omix-ADA the team knows what it is like to work in an environment the preserves the rich Jeep heritage. They get to live it everyday when they arrive at their offices. With thousands of products that we support a vast network of retailers and distributors. Whatever Jeep you drive, Omix-ADA and Rugged Ridge make Jeeps rock. For longer than twenty years, Omix-ADA has engineered and fabricated over 15,000 different restoration and replacement parts for Jeep drivers. Omix-ADA Corporation owns the quality aftermarket off-road brands Rugged Ridge, Alloy USA, Precision Gear, and Outland Automotive. Shop Omix-Ada Now