Every Jack comes complete with an adjustable top clamp/clevis for use in clamping and winching. Safety bolt is designed to shear at 7,000 lbs. (3175 kg). For speedy disengaging, lifting unit automatically drops away when load is removed. 4-1/2" (11cm) long lifting nose for positive contact with load. Steel bar can be reversed for extra long life. Low pickup of 4 1/2" (11cm). 28 square inch base plate.
Just getting into Off-Roading and figured I should have a way to get out of trouble should I get there. While I have not had a need to use as a winch, it seems to be sturdy enough to pull my stock 1995 ZJ out of most situations. I use a my main jack for repairs and does a good job on the stock lift. Simple to use but not stable enough for a long term support even with the optional base on concreet or asphault. If more than just a tire change or getting clearance to add traction under tires, use jack stands. The lever to change the direction of the jack (up/down) is a little stifr when new. Suggest a good light grease for the mechanics of the jack for the first use and to keep lubed. This initial stiffness appears to decrease with usage. Handle needs a better storage device as it will clank if not secured. Could use a pice of rope to tighten handle to jack shaft or get the optional rubber handle securer to eliminate the clanking.
Hi-Lift Jack's parent company Bloomfield Manufacturing was founded over 100 years ago and today Indiana-headquartered Hi-Lift produces jacks capable of lifting, winching, clamping, pulling and pushing. The Handyman or Sheepherder's jack was the Hi-Lift's original name and jeepers trust these accessories out on the trail in a variety of scenarios. Their trail jacks offer a rated capacity of 4,660 lbs. and a tested capacity of 7,000 lbs. and they are lightweight and easy to maneuver. We also carry tow straps and jack mount kits as well as storage options for trail jacks. Rely on a brand that has withstood the test of time to withstand the tests that come with off-roading. Shop Hi-Lift Jack Now