8 Products
##Sku-starts#
11:05:709##
Refine further
Refine further
-
-
-
-
-
-
Specifications
- 2.0 Performance Series Smooth Body IFP Bushing Mount Steering Stabilizer
- 23.95 in. Extended
- 15.85 in. Collapsed
- 2.0 x 8.0
- California Residents: WARNING
Specifications
- 97-06 Wrangler TJ/LJ
- 87-95 Wrangler YJ
- 84-01 Cherokee XJ
- Aluminum
- Extended 18.55 in.
- Collapsed 12.35 in.
- Stroke 6.2 in.
- California Residents: WARNING
Specifications
- 2.0" Impact extruded 6061-T6 aluminum body will resist rust over time
- Clear-anodized body plating for a durable finish
- Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
- Black-anodized, CNC-machined 6061-T6 billet aluminum components
- 5/8" hard chrome plated heat-treated alloy steel shaft
- Race-developed high-flow piston design
- Application specific valving to maximize performance
- Redundant sealing pack system main seal, wiper seal, scraper seal
- JM92 Advanced Suspension Fluid for improved performance at variable temperatures
- Quiet nitrile rubber bushings allows for increased suspension articulation
- Extended length: 20.44 in.
- Compressed length: 13.30 in.
- Travel: 7.14 in.
- Top bar pin mount
- Bottom eyelet mount
- California Residents: WARNING
Specifications
- 2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum
- Oneiece body resists rust over time
- Clear-anodized for a durable finish
- Iternal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
- Black-anodized, CNC-machined 6061-T6 billet aluminum
- 1/2" hard chrome plated heat-treated alloy steel
- Race-developed high-flow piston design
- Application specific valving to maximize performance
- Redundant sealing pack system main seal, wiper seal, scraper seal
- JM92 Advanced Suspension Fluid for improved performance at variable temperatures
- Quiet nitrile rubber allows for increased suspension articulation
- Extended: 28.02
- Compressed: 17.90
- Travel: 10.12
- Eyelet top and bottom mounts
- California Residents:WARNING
Specifications
- Steering stabilizer
- 2.0" Impact extruded 6061-T6 aluminum body will resist rust over time
- Clear-anodized body plating for a durable finish
- Internal IFP mono-tube reservoir design separates shock oil from the high-pressure nitrogen
- Black-anodized, CNC-machined 6061-T6 billet aluminum components
- 5/8" hard chrome plated heat-treated alloy steel shaft
- Race-developed high-flow piston design
- Application specific valving to maximize performance
- Redundant sealing pack system main seal, wiper seal, scraper seal
- JM92 Advanced Suspension Fluid for improved performance at variable temperatures
- Quiet nitrile rubber bushings allows for increased suspension articulation
- Extended length: 29.45 in.
- Compressed length: 19.35 in.
- Travel: 10.10 in.
- Top and bottom eyelet mount
- Sold individually
- California Residents: WARNING
Specifications
- 2.0 Performance Series Smooth Body IFP Bushing Mount Steering Stabilizer
- 2.0 x 6.0
- California Residents: WARNING
Specifications
- Fox 2.0 Performance Series Smooth Body IFP Stabilizer
- IFP Separates Oil From High-Pressure Nitrogen Gas
- Aluminum Body
- Black Anodized CNC Machined Aluminum Components
- California Residents: WARNING
Specifications
- 07-18 Wrangler JK, 2 & 4 Door
- Direct replacement for stock and aftermarket lifts kits
- 2.0" impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body
- 5/8" hard chrome plated heat treated alloy steel
- Race-developed high-flow piston design
- Redundant sealing pack system main seal, wiper seal, scraper seal
- Top Mount: Eyelet
- Bottom Mount: Tie Rod Clamp
- California Residents: WARNING
An email is sent to .
Enter email address to change your password
After you submit your email address, you'll receive an email a link that will let you change your password.
##Sku-section1 ends2#
11:05:279##
Thank You For Submitting Your Review.
Reviews
Q & A
Question & Answers
Answered question