Up To $500 Off Tires and Wheels | Shop Now
FlowKooler water pumps solve low-speed overheating problems by doubling the water flow rate at low RPM & idle. At 3,500 RPM the flow rate returns to normal to prevent excess water flow at high speed. Independent testing proves that FlowKooler water pumps produce 20% more gallons per minute at 2000 RPM & 100% more gallons per minute at 900 RPM than any other pump on the market today, including expensive racing pumps.
will this fit my 2003 wrangler sport, 4.0L 6cylinder gas? Any mods required as we are all right hand drive? Can I use back the stock water hoses? Thanks Randy Australia
Asked by Randy from Australia on
Randy, the FlowKooler High Flow Water Pump will work just fine for your RHD model Hope this helps!
Answered by Zach O. ext 4939 from Australia on
What is the impeller made of?
Asked by Charter from Maidens, VA on
Hi Charter the FlowKooler High Flow Water Pump impeller is made of aluminum. If you have any other questions please feel free to ask. Thanks,
Answered by Roy ext 4928 from Maidens, VA on
2003 jeep wrangler x 4.0 Does this water pump come with a warranty?
Asked by Bowhunter from Chilhowie,Va on
Hey Bowhunter, the FlowKooler High Flow Water Pump comes with a 2 year warranty. Thanks for your question.
Answered by Devin B. ext 4835 from Chilhowie,Va on
FlowKooler produces high flow water pumps in Paso Robles, California. The manufacturer's water pump impellers are more highly pressurized than stock Jeep water pumps. In addition, they move more cubic feet of water per minute than does the stock Jeep water pump. With this higher flow capacity and higher pressure, FlowKooler products prevent engine overheating. Pushing coolant through the block faster condenses the number of milliseconds it takes for the coolant to cycle from the engine to the radiator. The more coolant that gets pushed through per second, the larger the number of kelvins that can get transferred to the coolant and the result is better water pump impellers for jeepers. Shop FlowKooler Now