Up To $300 Off While Supplies Last!Shop Now
Flowkooler High Flow pump 1747 for the Jeep Cherokee, Commanche and Wagoneer has a CNC machined billet impeller designed with an increased vane count and a reduced impeller clearance to achieve greater flow rates, higher block pressure. A Type II Class II military grade anodize surface coating protects against corrosive fluids.
We developed this hi flow pump because Jeeps tend to overheat in stop and go traffic and on the trail. Tight engine space and limited airflow plague the Jeep cooling system but it has been proven time and time again that reducing the cycle time between the heat source and the heat sink drops engine temperatures for slow speed rock crawling and stop and go traffic.
From 0-3,300 RPM…Nothing Beats a FlowKooler!
Will I need to use a different belt with this waterpump?
Asked by rick from United States on
Hi Rick the FlowKooler High Flow Water Pump will use the same belt you will not have to change it out. If you have any other questions feel free to ask. Thanks,
Answered by roy ext 4928 from United States on
FlowKooler produces high flow water pumps in Paso Robles, California. The manufacturer's water pump impellers are more highly pressurized than stock Jeep water pumps. In addition, they move more cubic feet of water per minute than does the stock Jeep water pump. With this higher flow capacity and higher pressure, FlowKooler products prevent engine overheating. Pushing coolant through the block faster condenses the number of milliseconds it takes for the coolant to cycle from the engine to the radiator. The more coolant that gets pushed through per second, the larger the number of kelvins that can get transferred to the coolant and the result is better water pump impellers for jeepers. Shop FlowKooler Now