Up To $300 Off While Supplies Last!Shop Now
FlowKooler water pumps solve low-speed overheating problems by doubling the water flow rate at low RPM & idle. At 3,500 RPM the flow rate returns to normal to prevent excess water flow at high speed. Independent testing has proven that FlowKooler water pumps produce 20% more gallons per minute at 2000 RPM and 100% more gallons per minute at 900 RPM than any other pump on the market today, including expensive racing pumps. FlowKooler pumps also generate 22% more water pressure inside the engine block than other water pumps. This increased pressure helps suppress engine hot spots, steam pockets, and pinging. In addition to higher output, the FlowKooler water pump is up to 32% more efficient than other pumps, meaning less horse power is required to turn it. The result is overall lower operating temperature by as much as 30 degrees when cruising at low speeds. All pumps are brand new (not rebuilt).
FlowKooler produces high flow water pumps in Paso Robles, California. The manufacturer's water pump impellers are more highly pressurized than stock Jeep water pumps. In addition, they move more cubic feet of water per minute than does the stock Jeep water pump. With this higher flow capacity and higher pressure, FlowKooler products prevent engine overheating. Pushing coolant through the block faster condenses the number of milliseconds it takes for the coolant to cycle from the engine to the radiator. The more coolant that gets pushed through per second, the larger the number of kelvins that can get transferred to the coolant and the result is better water pump impellers for jeepers. Shop FlowKooler Now