will this fit my 2003 wrangler sport, 4.0L 6cylinder gas? Any mods required as we are all right hand drive? Can I use back the stock water hoses? Thanks Randy Australia
Asked by Randy from Australia on
Randy, the FlowKooler High Flow Water Pump will work just fine for your RHD model Hope this helps!
Answered by Zach O. ext 4939 from Australia on
Will I need to use a different belt with this waterpump?
Asked by rick from United States on
Hi Rick the FlowKooler High Flow Water Pump will use the same belt you will not have to change it out. If you have any other questions feel free to ask. Thanks,
Answered by roy ext 4928 from United States on
Will this water pump work with a v-belt system on a 1984 jeep cj7? Also, does this pump come with the gasket?
Asked by Jon from Calais, VT on
Jon, the FlowKooler High Flow Water Pump is made for an 80-86 CJ without Serpentine belts so it will work in your 84 with V-belts with no problems. It does include the gasket. Hope this helps!
Answered by Zach O. ext 4939 from Calais, VT on
FlowKooler produces high flow water pumps in Paso Robles, California. The manufacturer's water pump impellers are more highly pressurized than stock Jeep water pumps. In addition, they move more cubic feet of water per minute than does the stock Jeep water pump. With this higher flow capacity and higher pressure, FlowKooler products prevent engine overheating. Pushing coolant through the block faster condenses the number of milliseconds it takes for the coolant to cycle from the engine to the radiator. The more coolant that gets pushed through per second, the larger the number of kelvins that can get transferred to the coolant and the result is better water pump impellers for jeepers. Shop FlowKooler Now