These are our most popular mounts! The mounting clamp can be positioned horizontally for horizontal mirror arms and rails, or vertically for vertical mirror arms or rails. The clamp may be omitted which will allow the angle bracket to be used as a side bracket on any flat vertical surface, such as the side of a motorhome or the back of a Jeep. The brackets are made from cold rolled steel and are finished with chrome plating. The K-64A model has our world famous K-4A stud mount with screw on coaxial termination. All models come complete with mounting hardware. Use one of the 3-Way Mounting Brackets for single or dual antenna installation on your car, truck, van, motorcycle or motorhome. The actual size of the bracket is 2.25" (57mm) wide by 2.9" (74mm) high. With the stud in place, the height is 4.2" (107mm). They protrude outward from the vertical surface 1.9" (48mm). With the standard bolts supplied with the bracket, you can install it on a tube with a diameter up to 0.850" (22mm). If longer bolts are used, the maximum tube diameter is 1.5" (38mm).
Firestik Antenna Company has been in the personal communication business since its founding in Phoenix, Arizona in 1962. Back then, Firestik Antenna produced CB radios, test meters, amplifiers, oscillators and RF filters. Then in 1975, the company narrowed its focus considerably to concentrate on producing a line of high performance wire-bound CB antennas. The quality of the Firestik Antenna for CBs is so widely known that they have customers from Canada to Mexico to South America to Western Europe. CB jeepers know that while you may find cheaper CB antennas, you're never going to find a higher quality CB antenna than Firestik. Shop Firestik Now