The ProLink XTV allows UTV and ATV winch owners to replace the conventional winch hook with a safer and stronger shackle/D-Ring. Winch hooks can cut and fray recovery straps and often allow strap ends to escape during typical loose/tight cycles of a winching recovery. Screw pin shackles do not allow strap loops to escape due to the secure screw pin attachment. The ProLink XTV does not require splicing and is compatible with steel cables or synthetic ropes up to 5/16 inches. The cable eye is retained in the ProLink XTV by a 7/16 inch diameter titanium double shear pin and internal snap ring. It is easily installed in minutes. The EPDM Rubber Guard protects alloy fairleads and is securely attached to the ProLink XTV with 4 barbed tips. The ProLink XTV stows neatly against either roller or Hawse type fairleads and is designed to be used with common standard 1/2 - 5/8 inch shackles. MADE IN THE USA, the ProLink XTV is constructed of 6000 series billet aluminum and 6Al-4V titanium and is anodized/powder coated in 5 different colors. The ProLink has a max load rating of 6000 pounds and an ultimate failure of 22,000 pounds.
Boise, Idaho-based Factor 55 is an engineering design firm focused on mechanical design and analysis, which translates to parts and accessories like winch shackle mounts, fairleads, locks and receiver hitch D-ring mounts for off-roaders. Some of their more popular products lines for Jeeps include ProLink, FlatLink and HitchLink and they manufacture soft and Crosby shackles. Destructive tests are performed on every design produced to ensure they pass muster and will be capable of excelling out on the trail or on the highway. The Prolink shackle mount for winch cables and synthetic ropes can be a vital component to keeping your Jeep's winch operating smoothly and efficiently. Shop Factor 55 Now