Eaton E-Locker Differentials

By 3.73 and up, thats numerically, right? This will work with 4.56 gears?

Asked by Blake from Nashville, Tn on

Hi Blake, This Eaton Dana 30 27 Spline 3.73 Up E-Locker is indeed for 3:73 on up gears, so it works up to 5:13 ratio. Thank you for your inquiry.

Answered by Jim G Ext 4806 from Nashville, Tn on

I see this requires specific carrier bearings, are these included with the Dana 35 30 spline master installation kit (part# G/235-2049L)?

Asked by maddoxsd from on

Hi Maddoxsd, This Eaton Dana 35 30 Spline 3.54 Up E-Locker does indeed utilize a specific bearing and spacer that does not come with an install kit. We have the proper bearings, here they are and thanks for your question. You'll need 2 of each.http://www.4wd.com/Jeep-Drivetrain-Jeep-Axles-Differentials/Differential-Bearing.aspx?t_c=12&t_s=237&t_pt=8587&t_pn=TIMLM102949 http://www.4wd.com/Jeep-Drivetrain-Jeep-Axles-Differentials/Differential-Bearing-Race.aspx?t_c=12&t_s=237&t_pt=8587&t_pn=TIMLM102911

Answered by Jim G Ext 4806 from on

hi. the required LM102949 and LM102911 Carrier bearingsparts are included in the #G/235-2049L kit? many thanks

Asked by filippo from italy on

Hello Filppo No the bearings needed for the Dana 35 E-Locker do not come in the G/2 kit. The Dana 35 E-Locker uses different bearings than the stock carrier. Thanks

Answered by LWiff ext 4804 from italy on