Up To $500 Off Tires and Wheels | Shop Now
The Eaton ELocker4 is an electronic, selectable differential designed for drivers that need traction on-demand. At the flip of a switch, drivers can go from open to 100-percent locked and back again. The 4 pinion gear design provides added strength and capability for more extreme vehicles, and features the fastest engagement (.14 seconds).
I see this requires specific carrier bearings, are these included with the Dana 35 30 spline master installation kit (part# G/235-2049L)?
Asked by maddoxsd from on
Hi Maddoxsd, This Eaton Dana 35 30 Spline 3.54 Up E-Locker does indeed utilize a specific bearing and spacer that does not come with an install kit. We have the proper bearings, here they are and thanks for your question. You'll need 2 of each.http://www.4wd.com/Jeep-Drivetrain-Jeep-Axles-Differentials/Differential-Bearing.aspx?t_c=12&t_s=237&t_pt=8587&t_pn=TIMLM102949 http://www.4wd.com/Jeep-Drivetrain-Jeep-Axles-Differentials/Differential-Bearing-Race.aspx?t_c=12&t_s=237&t_pt=8587&t_pn=TIMLM102911
Answered by Jim G Ext 4806 from on
hi. the required LM102949 and LM102911 Carrier bearingsparts are included in the #G/235-2049L kit? many thanks
Asked by filippo from italy on
Hello Filppo No the bearings needed for the Dana 35 E-Locker do not come in the G/2 kit. The Dana 35 E-Locker uses different bearings than the stock carrier. Thanks
Answered by LWiff ext 4804 from italy on
Hi, i would like to know if the above item does work with dana 35 , 30 spline , C-CLIP axleshaft....yes or no ?
Asked by pippo from Italy on
Pippo, the Eaton Dana 35 30 Spline 3.54 Up E-Locker will work just fine for you. Hope this helps!
Answered by Zach O. ext 4939 from Italy on
The Eaton Corporation has enjoyed over a century of innovation and is in the business of powering Jeeps with a top-rate lineup of lockers, open differentials and limited slips. Traction performance is critical while jeeping and we carry Eaton components for upgrading vehicle traction. Compatible with different axle splines and various gears, these parts are often rebuildable and are top performers on and off-road. Eaton's rich tradition of engineering innovative, dependable products extends to off-road parts and accessories for 4x4s and they have evolved to become the industry standard in differentials, lockers and limited slips. Shop Eaton Now