Daystar Replacement Front Switch Panel Kit - KJ71030

Part Number: DAYKJ71030

Specifications

  • Position: Lower
  • Fitment: Direct Fit

    TECHNICAL DETAILS

  • 2 and 4-door models
  • 4 switch panel
  • Factory fit and finish

PRODUCT OVERVIEW

This front lower center dash panel will directly replace the existing OE panel allowing you to install 1 to 4 Rocker Switches. Eliminates under dash mounting of switches for lights, lockers and etc. Switches not included.

Reviews

4.2
4.2 4.2
1.0
Useless on manual tranny

NOT FOR MANUAL TRANNY. Not only does the shifter boot turn off the switches, easily corrected by pushing down the shifter boot and tie-wrapping it in place, but the shifter lever hits the switches and turns them off in 1st, 3rd and 5th gears. Go with the a-pillar instead Part Number: DAYKJ71043BK


By giorgiod from laval, qc | 8/26/13
5.0
Out standing product!

Easy to install and great product, meets my needs for offroad lights and other accessories.


By Monstrousmac from Spangdahlem Air Base, Germany | 12/28/12
3.0
Not good with manual trans,

I purchased this item to mount the switch for our 2007 wranglers' front Eaton e locker. However upon installation it became apparent that the shifter hit all but the far left switch. The instructions state you will need to push down the shifter boot when installed with manual trans. The problem is the shifter itself hitting switches,bad enough with a set of lights,downright disastrous with a front locker!If i had an auto trans I would give this 5 stars as is 3 stars is generous.


By Mountain goat from Ortonville MI | 3/9/12

Question & Answers

1 Answered question

do i need to make changes to the hazard and traction control switch?

Asked by Robert from on

Hi Robert with the daykj71030 you will not have to make any changes it is just a direct bolt in. If you have any other questions feel free to ask. Thanks,

Answered by Roy P EXT 4928 from on

Manufacturer

Driven by design, Daystar has been designing and producing premium 4x4 components for nearly 40 years. Primary products for Jeeps include lift and leveling kits, dash panels and hood accessories and Daystar manufactures parts and accessories for Wranglers, Cherokees and Liberties. When factory parts are not up to par, upgrade to Daystar�s line of unrivaled, ISO-certified plastic products for a variety of applications. 4WD carries switches, isolators, bump stops and more so improve performance on the trail and for your everyday driving. When you�ve got the guts to go off-road, Daystar products help make your ride a revelation with unrivaled products. Shop Daystar Now

This Product Fits the Following:

  • 2010  Jeep  Wrangler (JK)  Rubicon  
  • 2010  Jeep  Wrangler (JK)  Sahara  
  • 2010  Jeep  Wrangler (JK)  Unlimited Rubicon  
  • 2010  Jeep  Wrangler (JK)  Unlimited Sahara  
  • 2010  Jeep  Wrangler (JK)  Unlimited X  
  • 2010  Jeep  Wrangler (JK)  X  
  • 2010  Jeep  Wrangler (JK)  Sport  
  • 2010  Jeep  Wrangler (JK)  Unlimited Sport  
  • 2009  Jeep  Wrangler (JK)  Rubicon  
  • 2009  Jeep  Wrangler (JK)  Sahara  
  • 2009  Jeep  Wrangler (JK)  Unlimited Rubicon  
  • 2009  Jeep  Wrangler (JK)  Unlimited Sahara  
  • 2009  Jeep  Wrangler (JK)  Unlimited X  
  • 2009  Jeep  Wrangler (JK)  X  
  • 2008  Jeep  Wrangler (JK)  X  
  • 2008  Jeep  Wrangler (JK)  Unlimited X  
  • 2008  Jeep  Wrangler (JK)  Unlimited Sahara  
  • 2008  Jeep  Wrangler (JK)  Unlimited Rubicon  
  • 2008  Jeep  Wrangler (JK)  Sahara  
  • 2008  Jeep  Wrangler (JK)  Rubicon  
  • 2007  Jeep  Wrangler (JK)  Rubicon  
  • 2007  Jeep  Wrangler (JK)  Sahara  
  • 2007  Jeep  Wrangler (JK)  Unlimited Rubicon  
  • 2007  Jeep  Wrangler (JK)  Unlimited Sahara  
  • 2007  Jeep  Wrangler (JK)  Unlimited X  
  • 2007  Jeep  Wrangler (JK)  X  

Promotions

We Pay The Sales Tax

CHAT