The perfect piece to install rock switches in your new JK. The new Daystar Dash Switch Panel lets you install your rocker switches on your dash, in front of your shifter. Mount up to 5 rocker switches for your fog lights, air compressor and more. Available in black or tan. Rocker switches sold separately.
Here's what the instructions don't tell you. It's impossible to remove the OME lower dash panel on the 2011-12 models unless you move the console up a few inches. First pry the OME dash panel loose at the top with a screw driver. Next, Grab the console w/both hands( One on each side)close to the dash. Pull outward until you hear the clips release then pull up enough to free the dash panel from the dash. Install the new panel in reverse.
Will this switch panel work with a standard transmission? If not, is there one that will work for a JK 2011?
Asked by DJ from on
Hi Dj the Daystar Dash Switch Panel will not with a standard transmission. You could run the DAYKJ71044BK with no problems. If you have any other questions feel free to ask. Thanks,
Answered by roy p ext 4928 from on
how hard is the panel to install? Would you say
Asked by Whiteout from on
Hello Whiteout, This isn't too bad on install difficulty. I had mine installed in about 45 minutes. The most time consuming part was running the wires.
Answered by Matt C EXT 831 from on
Is this item only the panel, or are the switches included?
Asked by Matt from Halifax, Nova Scotia on
Thanks for the inquiry Matt, the Daystar Dash Switch Panel part # DAYKJ71034BK is just the panel only the switches are sold separately so you can run any color you'd like.
Answered by from Halifax, Nova Scotia on
Driven by design, Daystar has been designing and producing premium 4x4 components for nearly 40 years. Primary products for Jeeps include lift and leveling kits, dash panels and hood accessories and Daystar manufactures parts and accessories for Wranglers, Cherokees and Liberties. When factory parts are not up to par, upgrade to Daystar’s line of unrivaled, ISO-certified plastic products for a variety of applications. 4WD carries switches, isolators, bump stops and more so improve performance on the trail and for your everyday driving. When you’ve got the guts to go off-road, Daystar products help make your ride a revelation with unrivaled products.