This lift kit is perfect for the individual wanting additional clearance and great looks without spending a lot on major modifications.
Great product. One thing to be aware of is to remove the stock 5/8" spacer from the rear. The directions did not mention it so I tried it with both, which made it hard to install. After checking the result I took it all apart and just used the kit spacers. It's perfect. One added tip, remove brake line brackets attached to frame and remove the parking brake line bracket bolted to the rear floor. It will make dropping the axle low enough to insert the spacer a breeze.
Will my stock shocks work with this product on my 2009 unlimited x?
Asked by Carl from on
Carl, the Daystar 1.75 Inch Suspension Lift Kit will work just fine with stock shocks but an upgrade on a 2009 is recommended since you're already in there and I'll be they are worn out. Hope this helps!
Answered by Zach O. ext 4939 from on
How does this lift affect the auto sway bar on the 2012 JK
Asked by mw3 from Hobbs NM on
Hello! The auto sway bar is not affected by this lift at all. You'll just need to install longer sway bar end links, and the auto feature will still work as it currently does.
Answered by Aaron S. from Hobbs NM on
Where and how do you use the drop down brackets? You sent bolts but no nuts if I use the sway bar bolt and what then. I put it back with out using the brackets. COuld not figure out how to use them?
Asked by Mark from Lake Havasu Az on
Mark I can see where these instructions may have been a little bit confusing, let me see if I can help. Find on the front your Jeep where the anti sway bar brackets mount to the frame. Take off the stock bracket by remove the 2 bolts out of each side (driver and passenger) Put the new drop down bracket between the frame and the stock sway bar bracket. Install using the new bolts. Then just do the same on the rear.
Answered by Jason L from Lake Havasu Az on
Driven by design, Daystar has been designing and producing premium 4x4 components for nearly 40 years. Primary products for Jeeps include lift and leveling kits, dash panels and hood accessories and Daystar manufactures parts and accessories for Wranglers, Cherokees and Liberties. When factory parts are not up to par, upgrade to Daystar's line of unrivaled, ISO-certified plastic products for a variety of applications. We carry switches, isolators, bump stops and more so improve performance on the trail and for your everyday driving. When you've got the guts to go off-road, Daystar products help make your ride a revelation with unrivaled products. Shop Daystar Now
Save 10% On Daystar Comfort Ride Suspention Kits