Up To $500 Off Tires and Wheels | Shop Now
Don't take chances with inferior aftermarket ball joints. Dana Spicer offers these replacement Ball Joints that same Joints that come in your vehicle from the factory and are known for lasting 100,000 miles plus in many applications.
Dana balljoints in my opinion are better than most aftermarket balljoints that i have worked with they are easy to install no serated edges and last a long time. My jeep yj had over 100,000 miles on originals with 35 inch tires and lots of wheeling. they are priced cheeper than most cheeply built replacments
I have a 2004 rubicon will this work with dana 44s and is this a upper and lower set together
Asked by Donnie79 from Athens tn on
Yes, these Dana Spicer Replacement Ball Joints will work on your Jeep. This is an upper and lower set for one side. To replace both driver and passenger side you will need 2 kits. Thanks!
Answered by Craig R. from Athens tn on
I have a 1990 wrangler YJ will these replace the front upper and lower joints on a d30 axle?
Asked by sybenn from colorado springs on
Yes this will work on your YJ D30. This part has enough for one side. To replace drivers and passenger side you would need 2 kits.
Answered by Jason from colorado springs on
Dana Spicer products strive to meet the same high standards as OE parts, but in reality they are OE parts. The company's commitment to engineering and design innovation stretches back to 1904 when Dana was founded and began producing Spicer products. That legacy translates to quality, dependable axle components that keep Jeeps out on the trail and help daily drivers brave commutes with confidence. Driveshaft parts, universal joints, Dana axles and Spicer axle components are some of the Dana Spicer products that Jeep owners know they can count on. When you need to tighten up a sloppy differential, replace the clutches in your limited slip or replace a worn out yoke, call on Dana Spicer. Shop Dana Spicer Now