Save Up To 50% On Overstock! | Shop Now

FREE SHIPPING on Orders over $50*

Currie RockJock 60VXR Front Axle Assembly (Detroit Locker - 5.38 Gear Ratio) - CE-LF6503D53

universal fit logo

Specifications

  • Currie | Part Number: CURCE-LF6503D53
  • Wheel Bolt Pattern:8 On 6.5 Inches
  • Traction Device:Detroit Locker
  • Housing Type:18-Up Jeep JL Currie RockJock 60VXR
  • Front Or Rear:Front
  • Axle Spline:35 Splines
  • Gear Ratio:5.38
  • Brakes:Disc Brake Upgrade

PRODUCT OVERVIEW

The RockJock 60VXR high pinion front crate axle is simply the strongest 60 series axle that we offer, designed for extreme off-road use with up to 40-inch tires and V8 conversion horsepower. The RockJock 60VXR is built to the legendary Currie Standard and loaded with exclusive features including: a stronger reinforced stage-2 radius bottom center section, ring gear load bolt, large 3.5-inch axle tubes and bigger brakes plus much more. If you seek out the most challenging routes and toughest obstacles to conquer then the RockJock 60VXR is the crate axle of choice.

Additional features:
-13.25 inch vented rotors (over 1.25 inches larger diameter than stock for increased braking) with zinc plated caliper brackets
-Dual piston calipers with increased pad contact area for improved braking
-Currie Currectlync 1 5/8 inch diameter, .250 wall heat treated chromoly tube with 1 1/4 inch forged tie rod ends
-Heavy gauge 3/16 inch steel mounting brackets with multiple mounting locations that enable the suspension geometry to be tuned
-Currie Johnny Joints installed with 1/2 inch greasable bolts
-Optimized for 4 inch lift kits with 5 degrees of pinion angle to reduce driveshaft angle and 5 degrees of caster for improved steering
-Ram mounting brackets welded to housing, setup for PSC 8 inch travel steering ram
-95 inch wide (between wheel mounting surfaces), enables full turning angle with 40 inch tires
-6 lug (6 on 5 1/2 inch) with 1/2 inch studs installed or 8 lug (8 on 6 1/2 inch) with 9/16 inch studs installed
-Black satin powder coat

Reviews

Question & Answers

0 Answered question

Manufacturer

Since 1959, Corona, California-based Currie Enterprises has been currying favor with Jeep enthusiasts by manufacturing suspension systems and accessories, driveline parts and steering components that withstand grueling off-road conditions. With the rise in interest in off-roading in the 1970s, the company focused its attention on trucks and Jeeps, specifically rearends. Replacing worn out or damaged suspension parts like leaf spring bushings goes a long way toward improving off-road performance and Currie's specialty products exceed expectations. Addressing the needs of a variety of Jeep models, Currie is the right choice when you want to lift your Jeep, upgrade the steering or take the guesswork out of making a safe mounting. Shop Currie Now

Promotions