Crown Automotive Blower Motor

The last motor I bought from 4WD did not work due to it rotates Counter Clockwise from the shaft end to the motor does this one rotate clockwise? it is for a 79 CJ7.

Asked by Tim from Three Rivers, CA on

Hi Tim I verified it with Crown and they say the shaft should rotate clockwise on the Heater Blower Motor. Thanks

Answered by LWiff ext 4804 from Three Rivers, CA on

Do you need to cut the fire wall to make this part fit on a 1983 cj

Asked by cal from brigham on

Hello! This is a factory replacement Heater Blower Motor so it will bolt directly in place of the original one. Thanks!

Answered by Bob H from brigham on

jeep wrangler 1995, whats involved taking out heater blower motor?

Asked by bill3578 from leominster, MA on

Hello! This blower motor is changed from the engine compartment. It has like 4 screws that holds in to the firewall. Unscrew them and disconnect the terminal plug and pulls out of the firewall heater box. You will have to take the squirrel cage off the old motor buy taking the C-clip off. slide the cage on to the new motor and put C-clip back on and re-install the new motor. Thanks!

Answered by Bob H from leominster, MA on