Qualifies for Free Shipping
The BTF Stand-Alone Coil Mounting Kit makes a tough job easy. This kit comes with everything but the coils. You will receive enough parts to mount one set of coils. Our kit was designed to work with axle tube diameters up to 3-1/2 inch. The kit captures the upper and lower mounting points so you will never have a spring pop out. The upper mount was designed to be used on the inside or outside of the frame rail or if you have the Tube Chassis kit then the upper mount was designed to weld to the bottom of a piece of 1 3/4 round tube. The installed width of the upper mounts set the width of the lowers. All of the plate parts in this kit are laser cut from 3/16 inch high-strength steel. The kits includes grade 8 hardware along with a spacer sleeve to prevent over-tightening (and warpage) of the capture plate and another 2-1/2 inch sleeve of the same height to keep the spring centered on the perch. These coil mounts work with rear TJ coil springs or 2-1/2 inch coil-over springs.
Blue Torch Fabworks, Inc. was founded in 2001 specifically to fill the market gap for Jeep parts for the DIY at-home garage builder with moderate fabrication skills. BTF's own facility is a hi-tech, 33,000 sq. ft. campus in Birmingham, Alabama that includes a fabrication shop, machining shop, corporate suites and a product display space. It's here that the BTF team designs and tests their premium Jeep parts and accessories for quality, durability and ease of use. The other proving ground for BTF's customized fabrications is the race trail and they create custom builds for off-road racers in order to test new products and upgraded designs on current products. Shop Blue Torch Fabworks Now