High-access bumpers provide more clearance in front for larger 35 inch and up tires. Well-known for great design, toughness and ease of installation. Available in Satin Black or Matte Black finishes. Satin Black is a glossy surface finish while Matte Black is a flat black textured finish -- same great bumper, same high quality powder coat finish.
First, let me say that mine fits the fender of my 2010 JK perfectly, not like what is shown in the photo with the previous review. There is a slight gap but the bumper lines up perfectly with the fender. I had planned to install a winch on my stick bumper, retain the factory. towing hooks. But the cost for a mounting plate was $400, installed. I got this cool bumper for that. It is light enough for one (old) person to pick it up. I installed the factory fog lights and bull bar first. Then you must install your winch to the bumper prior to putting the bumper on the Jeep. I like that because no one can steal your winch off the bumper later. My winch was heavy, so I used a motorcycle jack, and assembled the winch to the bumper sitting across the jack. Then I raised the finished assembly up into place with the jack holding it while I put the 8 bolts thru the factory mount holes in the Jeep. This is a terrific bumper. It looks good, holds two lights above the bar and provides extra clearance. I got the roller also, but it's mounts had to be cut off to install the towing gear for flat towing the JK.
THE BUMPER FIT GOOD AND INSTALLED WITH EASE, HOWEVER THE OPTIONAL STAINLESS STEEL GRILLE GUARD DID NOT FIT WELL AT ALL.THE ANGLES WERE IT BOLTED TO THE BUMPER WERE NOT MATCHED TO THE ANGLE ON THE BUMPER. BESTTOP SOLUTION WAS TO SEND ME SOME 1/4" THICK SPACERS TO PUT BETWEEN THE BUMPER AND THE GRILLE GUARD. HAD SOME KNICKS FROM SHIPPING WAS COMPENSATED FOR IT WITH A GIFT CARD.
This is an excellent high quality bumper! After denting the factory bumper on my 15 Sahara, I ordered this bumper because I like the look of it. I ordered it on Sunday 3/22 and it was on my porch when I got home from work 3/25. I saw others complained about packaging but it was fine for me. The install is pretty easy, although this bumper is pretty heavy so I would recommend having help. I did the install myself and it took about 3.5 hours, but I was taking my good ole time. haha. You will have to order the vacuum pump relocation kit and that job isnt too hard. If you're going to get the brush guard I would recommend ordering it at the same time and installing it to the new bumper before you put the new bumper on your jeep.
I use a blue ox tow bar to pull my rubicon. Will this fit above my tow bar base plate or can i get an adapter to pull using the D rings or D ring mounting holes?
Asked by Mike from Grand island, fl on
Mike, the Bestop HighRock 4x4 High Access Front Winch Bumper in Matte Black can be adapted to pull off of the d ring mounts but I doubt that this will clear the base plate due to the way it mounts. Hope this helps!
Answered by Zach O. ext 4939 from Grand island, fl on
Does the vacuum canister have to be relocated with this bumper? I have a 2016 jeep JK 2 door
Asked by joeyd from Bridgeport Pa on
Hi joeyd, This Bestop HighRock 4x4 High Access Front Winch Bumper in Matte Black will not interfere with the canister on your 2016 JK, great question and thanks for your inquiry.
Answered by Jim G Ext 4806 from Bridgeport Pa on
1. what fog lights fit this bumper? 2. one customer review states that the bumper end doesn't match up to the fender flare. Is there any way to improve this?
Asked by Doobie from on
Doobie, the Bestop HighRock 4x4 High Access Front Winch Bumper in Matte Black will hold the factory fog lights, or any 4" round fog light made for Wranglers from 2007-2015. If the flares don't match up 100%, you can always trim them down to be flush. I hope this helps!
Answered by Sara H. Ext 4874 from on
Smittybilt Grab Handles
Smittybilt D-Ring Shackles
Smittybilt XRC GEN2 Recovery Winches
Bestop Floor Liners
Bestop HighRock 4x4 D-Ring
Bestop HighRock 4x4 Full Width Front Bumpers
Bestop HighRock 4x4 2 Inch Receiver Hitch Bumpers
Bestop HighRock 4x4 Grille Guards
Daystar D-Ring Isolators
Pro Comp 7 Inch 100 Watt Driving Lights
Factor 55 ProLink Loaded Shackle Mounts
Your Jeep's top reflects personal style and protects against the elements of sun, rain, snow and mud and Bestop's soft tops are popular choices for replacing OEM soft tops. Whether it's a tough top that will be exposed to harsh elements or a refined one that you think fits your Jeep's style better, Bestop has the track record and the complete line to make your journey more memorable. A classic Supertop, Bikini or Halftop or Sunrider instantly transforms your 4x4, providing protection, ventilation, tinting and maintaining its shape through temperature fluctuations. Easy to attach and easy to get attached to, Bestop is the premium brand when it comes to Jeep tops. Shop Bestop Now