Up To $300 Off Black Friday Deals! Shop Now

Be Cool 16 Inch Electric Puller Fan - 75001

universal fit logo


  • Be Cool | Part Number: BEC75001
  • Fan Style:Single
  • Blade style:Straight blade
  • Fan type:Puller
  • Fitment:Universal Fit
  • Size:16 inch


Increase horsepower by replacing your mechanical fan with Be Cool electric fans. Improving airflow is one key to maintaining your vehicles operating temperature. This 16 high torque fan will provide substantial air flow increases compared to the stock mechanical fan at idle or low vehicle speed. When used in conjunction with a Be Cool radiator, vehicle will operate at or near the thermostat temperature. This fan produces 2360 CFM at only 12 volts drawing 16 amps and fan motor has a life cycle of 6000 hours. Fans include universal mounting brackets. Wiring sold separately. This fan is 3-1/2 thick and requires a minimum distance of 3-3/4 between the radiator core and the water pump hub. Please measure your vehicle before ordering.



Question & Answers

3 Answered questions

what controls should be used with this fan assembly?

Asked by waldo from canada on

BeCool recommends part number BEC75021. It can be found here http://jo.my/fan_wiring_harness I hope this information is helpful. Thanks!

Answered by Craig R. from canada on

what part number or fan control should be used with this unit?

Asked by Waldo from Canada on

Hello! This Be-Cool 16" Electric Puller Fan uses the #BEC75021 Electric Fan Wiring Harness Kit. Check it out here. http://jo.my/fan_wiring_harness Thanks!

Answered by Bob H from Canada on

Hi, does this fan replace the stock mechanical fan or both the mechanical fan and the 2nd electrically operated auxilliary fan? If it replaces both how does the AC work? What controls would you recomend for this fan?

Asked by Dave from Cape Town, South Afirca on

This is an upgrade fan to replace the factory mechanical fan. You would have to run a dual electrical fan one will cool the radiator and the other will be for the A/C when it's in use will turn on to help cool the radiator.

Answered by Bob from Cape Town, South Afirca on


Be Cool Radiators is based in Essexville, Michigan and was founded in 1994. Original founder Roger Rosebush had been involved in motorsports since adolescence and back in the day, he and his siblings built out a 57 Chevy with a 427 big block engine and used it for illegal street racing. Rosebush became hooked on designing and building more and more powerful engines and this endeavor eventually led him into professional race car driving. Motorsports evolved into a desire to engineer better cooling systems for ever more powerful engines. Be Cool Radiators has, from its founding, had one focus: making the best easy-install, bolt-in aluminum radiators for your Jeep. Shop Be Cool Now