Banks Heavy-Duty Stainless Steel Monster Exhaust system cuts back pressure up to 98% and flows up to 176% better than stock. The streamlined intermediate pipe and tailpipe are formed of stainless, heavy-wall tubing with constant-diameter bends to maximize airflow and lower exhaust gas temps.
This is a very easy system to bolt on. You will need a grinder or a sawzall for easier removal of old exhaust, and to shorten stock converter. The sound is perfect and i can really feel the performance increase! looks nice also!
Easy to install. The finish on the product was very nice. I made mine into a drop down behind the axle. Sounds like a 4.0 should sound.
Very easy to Install in less than 45 min. Installed on my 2014 jk and very pleased with the sound and The look, instruction are very clear on how to install and where to measure and cut the old exhaust
So I installed this in my driveway, took maybe 1.5 hrs with the majority of that in removing the skid for better access and cutting the old exhaust out. Bolts in perfectly, no trimming or modifications necessary as with some of the cheaper exhaust systems Ive installed through the years. Note this is a glasspack muffler, and sounds accordingly. I dont remember if it says so or not in the description, but after a few days I noticed some fiberglass collected in the tip. Nice rumble at idle and great sound around town, people turn their heads if you stay in the throttle.. But not enough drone at highway speeds to irritate, between the tire noise, soft top flap and stereo blaring is barely noticeable. Does it increase performance? Most likely not, at least not that Ive noticed. Sound great and makes me smile when it starts up? Heck yeah!
this system fit great sounds awesome I have found an increase in power and fuel economy !!!
Good product, just wish it didn't vibrate your brain when engine braking or when the revs are below 2300 rpm.
Installed system myself, directions were straight forward. Must be careful when removing old system as not to cut the cat pipe. The quality of muffler and pipes were top notch.
Check out this review article: http://offroad-review.com/new/index.php?page=561
Nice, throaty sound above 2500 rpm. Installed well.
Good Product just it looks like it is going to continue rusting on me but I have had it for over 50000 miles and it has been through alot. All and all I like it and I am glad I tried it but I will continue to try other brands in the future that offer higher quality SS.
is the whole system made from s/s and 2 5 inch all the way through & is the s/s 409.
Asked by charlie from pearl river la on
Hi Charlie, This Banks Power Monster Exhaust System is in fact stainless front to back, it's a grade 409 stainless. Great question, thank you for your inquiry.
Answered by Jim G Ext 4806 from pearl river la on
I am interested in the torque tube headers as well as this monster kit. However It seems there is no down pipe or cat. Am I missing something? It seems the price also reflects this but i dont want to piece together parts from different manufacturers praying they match up smoothly.
Asked by rebel jeeper from Marion Wisconsin on
Hello rebel jeeper, The Banks Power Monster Exhaust will use the factory headpipe and cat. As long as you are using a direct fit catalytic converter everything will match up fine. Thanks for the inquiry.
Answered by Adam from Marion Wisconsin on
how loud is this exhaust , I want performance but not a lot of noise , more zoom. zoom
Asked by gene from blue ridge , ga on
Hello Gene, These Banks power monster exhaust kits have a deeper sound then most exhausts. They are not extremely loud but do produce some noise. If you have anymore questions feel free to ask, Thank you.
Answered by Jordan ext 4833 from blue ridge , ga on
Banks Power Ram-Air Intake Systems
Accel Super Tune Up Kit With Spark Plugs
Banks Power Ram-Air Intake Systems
Banks Power Torque Tube Exhaust Header Systems
aFe Power Silver Bullet Throttle Body Spacers
JBA Shorty Exhaust Headers
Headquartered in Azusa, California, Banks Power was a byproduct of Banks Engineering, established over 50 years ago. Its decorated history of breakthrough innovations in gas and diesel engine advancements includes drivetrain and turbocharging and high performance products for gas and diesel systems. Among its Jeep products are sidewinder turbos, exhaust manifolds, tuners and programmers and cold air intakes. Whether you're turbocharging, trying to boost exhaust flow and reduce backpressure or optimizing engine efficiency, Banks Power's impressive lineup of parts and accessories are durable enough to weather the stress and perform under extreme duress. Shop Banks Power Now