Laser-cut from 5/16 thick high-strength steel plate. The brackets are designed to work on axle tube diameters from 3 1/8 to 3 1/2. The shorter bracket measures 1 1/2 from the edge of the axle tube to the center of the bolt hole to accommodate the largest of suspension joints. The bolt hole size is laser cut to 5/8 but could be drilled up to 1 if necessary. Double-triangulated four-links require the bottom links to come off the axle tube at an angle so the links can meet just under the transfer case. BTF offers this tab set to do just that. The tabs would be used by placing one long and one short tab on each side of the axle. This will make the link come off the axle tube at an angle. If the angle is not exactly what you need you can simply trim a little off one tab to get more or less angle. In this tab set you will receive 2 long tabs and 2 short tabs.
Blue Torch Fabworks, Inc. was founded in 2001 specifically to fill the market gap for Jeep parts for the DIY at-home garage builder with moderate fabrication skills. BTF's own facility is a hi-tech, 33,000 sq. ft. campus in Birmingham, Alabama that includes a fabrication shop, machining shop, corporate suites and a product display space. It's here that the BTF team designs and tests their premium Jeep parts and accessories for quality, durability and ease of use. The other proving ground for BTF's customized fabrications is the race trail and they create custom builds for off-road racers in order to test new products and upgraded designs on current products. Shop Blue Torch Fabworks Now