The Rock Ram system is the Original hydraulic assisted steering system designed and developed for competition rock crawlers, the Rock Ram System will improve the off road and on highway handling of any vehicle running larger than stock tires. It works equally well on weekend trail riders, hardcore rock crawlers and the 4wheel drive with large tire and a lift kit who rarely gets off road but needs additional steering to move the big tires into tight parking spots. The Rock Ram system increases your steering force yet 100 percent or more, yet still retains excellent handling characteristics for on road driving. The Ram cylinder serves as an added assist to the gearbox and as a POWERED Steering Stabilizer, eliminating the need for a conventional steering stabilizer. The Ram Cylinder uses dynamic hydraulic pressure to control the front end movement, not just cushion it and the results produce a smoother ride and increased steering control. The Rock Ram System consists of our competition and trail proven Super Ram Box, Rock Ram Super Pump, and the Rock Ram Hydraulic cylinder and install kit. The Super Ram Box has been machined and ported and fitted with a properly matched Rock Ram Valve to provide the needed increased fluid flow to supply both the Ram Box and the Ram cylinder, not to be confused with the backyard conversion that results in a slow and sluggish steering system. The Rock Ram gear box is manufactured with light valving for turning ease. The gear ratios vary depending on the vehicle application, In additional to the tremendous increase in turning force the Rock Ram System reduces stress on the steering gearbox and frame by sharing the load with the Ram cylinder. The components and modifications include the Rock Ram system are purpose designed to provide pure turning power for off road maneuvering and at the same time stabilizing the front end while driving on pavement. The Rock Ram System is the ultimate in steering components kits, however it is not the fix for other components needing repair or replacement. Our Heavy Duty JK box starts life as the Saginaw box found in 3/4 ton GM trucks that have been proven for years. We then machine the box to accept our 1/4 inch wall DOM tubing to allow the longer sector shaft and our roller bearing kit. The mount plate is 3/8 inch thick with laser cut gussets for additional strength. All boxes come with factory stops to keep the steering angle sensor within operating parameters.
Steerco is a maker of performance aftermarket Jeep steering products under the brand name Steerco and, as of December 2015, under the brand name American Gold Racing "AGR." Steerco is based in Fort Worth, Texas and all AGR and Steerco products are manufactured in the United States. AGR Jeep gear boxes, Jeep steering boxes, steering systems and pumps all come with the Steerco guarantee. Steerco can offer this guarantee because with their manufacturing taking place stateside, they dedicate a very high level of attention to quality manufacturing processes. Shop AGR Now